Installation
Changing the decor panel
Note: The door should be closed when installing the decor panel.
On the door lock side remove the 4 screws (3 on the side and 1 under- neath) and the door strip.
Loosen the remaining 7 screws on the lower and side decor strips until the decor panel can be bowed slightly and taken out.
Reassemble in the reverse order and tighten the screws.
Decor panel dimensions
(Values in bracket demote tolerances in mm)
Width: | 587 mm (- 1) |
Height: | 602 mm (- 1.5) |
Thickness: | 1 mm (+ 0.5) |
Panels which are thicker than 1.5 mm require a 4 mm adapter strip available from Miele specialist dealers or the Miele Spares Dept.
Note:
When using the adapter strip, the height of the panel should not exceed 596.5 mm (- 1.5).
21