Miele T1520 operating instructions Fitting a toekick panel

Page 22

Installation

Fitting a toekick panel

The appliance toekick below the door can be concealed using a toekick panel.

The height and depth of the appliance toekick cannot be altered.

A cut-out must be made in the toekick panel around the ventilation slots as otherwise the airflow to the appliance will be blocked and the machine will not dry efficiently.

22

Image 22

Contents Operating Manual for the T 1520 Vented Dryer Contents Guide to the machine Indicator lamps PushbuttonsImportant Safety Instructions Important Safety Instructions Disposal of the packing ma- terial Your contribution to the environmentDisposal of your old machine Loading the machine Unloading the machineFollowing fabrics should not be dried in a tumble dryer Program selection To select a program Correct procedureProgram is cancelled if To change a program during dryingHand iron rr ProgramsNormal Machine ironWarm Normal +Hand iron CoolCleaning and care Cleaning the lint filters Cleaning the dryerProblem solving guide What to do if, . . . ? Cause RemedyIng the drying cycle? Event of a power Failure?To function? To open the door in the event of a power failure After-sales service SpecimenElectrical connection This appliance must be groundedWhere to install the machine InstallationInstallation Decor panel dimensions Changing the decor panelFitting a toekick panel Installation venting Exhaust connection can be madeTo calculate the effective duct length Tabel Type of bend Angle Radius in mm Additional ductResult ExampleEffective duct Internal diameter or Length m Dryer-top view Wall vent kit exampleDryer-side view Wire spiral-wound hose Permanent Press Consumption dataCottons Load Final spin speed Electrical Drying time inclTechnical data Page