Miele W 1926 To check if the function has been stored, Deleting the additional func- tions

Programmable functions

To check if the function has been stored:

Carry out Steps 1 to 4.

If the “Rinse 1-2” lamp lights up, the programmable function is activated.

Press the “ON/OFF” button. This fi- nishes the check of the program- mable function.

If, after Step 2, the selector switch is accidentally turned to a setting other than one of the three shown:

–If the “Rinse 1-2” indicator does not light up - no function was acti- vated

–If the “Rinse 1-2” indicator lights up - proceed as in “Deleting the additional functions”.

Exception: the “Rinse 1-2” indicator will light up if the switch is set to “COTTONS 95°C”.

Deleting the additional func- tions:

Follow the same instructions given under “To activate the additional func- tions”, steps 1 to 4.

When the “Rinse 1-2” lamp goes out;

Press “ON/OFF”.

The additional function has now been deleted.

26