Miele W 1986 Cancelling a program that has started, Making changes to the pro- gram

Page 19

Using the washer

Cancelling a program that has started

^Turn off the washer with the "On/Off" button.

^Turn the program selector to "End".

^Turn on the washer with the "On/Off" button.

^Turn the program selector to "Drain/Spin".

^Select the desired spin speed.

^Press "Start".

Making changes to the pro- gram

The following changes can be made to a program once it has already started:

the spin speed may always be ad- justed.

up to 6 minutes after the start of a program the wash options "Sensitive" and "Extended" can be selected or deselected and the temperature of the program can be changed to an- other temperature within the same program.

Once the program starts you can not change to a different program.

The "Anti-crease/End" indicator will blink if the program selector has been moved. The program will not be af- fected. The indicator will go out, if the program selector is turned back to the original program.

Skipping part of a program

^Turn the program selector to "End".

When the desired program cycle flashes in the program sequence dis- play:

^Turn the program selector, within

4 seconds, back to the original pro- gram.

To change a program

^Turn off the washer using the "On/Off" button.

^Turn the program selector to "End".

^Turn on the washer using the "On/Off" button.

^Select the new program.

^Select the desired spin speed.

^Press the "START" button.

19

Image 19
Contents Operating instructions Contents Installation instructions Important Safety Instructions Control panel Guide to the washerBefore using the washer Prepare and sort laundry Using the washerLoad the laundry Fine rinse Select a programJeans Dress shirtsFabric Cottons Program guideSpecial spin options Select a spin speedSelect wash options if needed Add detergent Water softener DetergentDo not use chlorine bleach Water hardness Fabric dye Using the Starch programFabric softener StarchStart the program Select Delay StartActivate the program lock if necessary Remove the laundry Unload the laundryAdding/removing laundry during a wash program Cancelling a program that has not yet startedDrum door can not be opened if To change a program Cancelling a program that has startedMaking changes to the pro- gram Skipping part of a programTo activate the program lock To cancel the program lockLocking the washer Electronic program lockTo activate the safety lock Child Safety LockTo deactivate the safety lock Cleaning the detergent drawer Cleaning the washerWasher care Cleaning the drain pump and lint trap After cleaning Quick Guide Select a program Quick GuidePrepare and sort laundry Load the laundryUnload the laundry Select Delay Start if needed Start the programSelect wash options if needed Add detergent Activate the program lock if necessaryProgram guide Cleaning the inlet hose filter Cleaning the water inlet filtersCleaning the filter in the inlet valve Program stops and a fault indicator blinks Frequently asked questionsProgram will not start Program runs normally but a fault indicator lights up Poor wash results Gent residue on What if … Possible cause Fix Laundry has aGray sticky residue? There is white deterDoor will not open when the Door button is pressed Opening the drum door during a power failure PC Update After Sales ServiceInstallation Instructions Electrical connection InstallationHelp protect our environment Plumbing connectionDisposal of the packing materials Help protect our environmentDisposal of an old appliance Front view InstallationInstallation site Washer / Dryer Stack Installation beneath a counterRemove the shipping struts InstallationInstallation Level the washer Adjust the four leveling feetWater connection Plumbing connectionPlumbing connection Connection to the drain system Grounding Instructions Electrical connectionPage Page Alterations rights reserved /000/1302