JVC TH-A75 manual Others menu, ¶ Cross Over

Using the choice menu

¶CROSS OVER

Small speakers cannot reproduce the bass sounds efficiently. If you use a small speaker in any position, this system automatically reallocates the bass sound elements assigned to the small speaker to the large speakers.

To use this function properly, set the crossover frequency level according to the size of the small speaker connected.

•If you have selected “LARGE” for all speakers, this function will not take effect.

•You can also set the crossover frequency using SETTING/ADJUST button on the remote control (see page 25).

Select one of the following settings:

80Hz : Select when the cone speaker unit built in the speaker is about 12 cm.

100Hz : Select when the cone speaker unit built in the speaker is about 10 cm.

120Hz : Select when the cone speaker unit built in the speaker is about 8 cm.

150Hz : Select when the cone speaker unit built in the speaker is about 6 cm.

200Hz : Select when the cone speaker unit built in the speaker is less than 5 cm.

CAUTION:

When using the supplied speakers, select “200Hz.”

NOTE:

Crossover frequency is not valid for the HEADPHONE mode.

¶RETURN TO INITIAL

Select this to reset all speaker settings to the initial values.

OTHERS menu

¶RESUME

If you turn off the power while playing back a disc, the position where the playback has been stopped is stored. You can activate or deactivate the resume playback function.

The RESUME indicator lights up on the display when turning on the system if the resume function is activated. To resume playback from that position, press DVD or PLAY on the remote control.

•The resume playback function does not work for Audio CDs.

Select one of the following settings:

ON : Select to activate this function.

OFF : Select to deactivate it.

¶ON SCREEN GUIDE

You can activate or deactivate the on-screen guide icons.

Multi view angle	:
Subtitle	:
Audio language	:
Playback status	: ,	,	x2 , etc.

The guide icons appear on the TV at the beginning of the operation with this function turned on.

Select one of the following settings:

ON : Select to activate this function.

OFF : Select to deactivate it.

OTHERS
RESUME		ON
ON SCREEN GUIDE		ON
AUTO STANDBY		OFF
PARENTAL LOCK
SELECT	USE	TO SELECT, USE ENTER TO CONFIRM.
ENTER	TO EXIT, PRESS CHOICE.

•Subtitles (see page 37) and the information for zooming in (see page 42) appear on the display even though this setting is “OFF.”

¶AUTO STANDBY

When disc playback on the built-in DVD player ends and no operation is done for more than the specified time (60 or 30), the system is turned off automatically.

•This function takes effect only when DVD is selected as the source.

Select one of the following settings:

60: Turns off the system if no operation is done for 60 minutes.

30: Turns off the system if no operation is done for 30 minutes.

OFF : Select to deactivate the function.

•If the sleep timer (see page 18) and Auto Standby are used at the same time, the one with the earlier shut-off time will turn off the system.

¶PARENTAL LOCK

Select this to enter the PARENTAL LOCK sub-menu. You can restrict playback of a DVD containing violent scenes and those not suitable for your family members. (see “Restricting playback—Parental Lock” on page 57 for the detailed operations.)

•You can select “PARENTAL LOCK” only before playback.

56