JVC TH-A75 manual Procedure for connection, Available functions

Procedure for connection

1If you have already plugged your VCR, TV and the center unit into the AC outlets, unplug their AC power cords first.

2Connect the VCR, TV and the center unit using AV COMPU LINK cords (one cord is supplied).

•See “Connection 1” on the previous page.

3Connect between the audio output jacks on the VCR and the VCR AUDIO IN jacks on the center unit using the audio cord.

•See page 13.

4Connect the video input/output jacks on the VCR, TV and the center unit.

•See “Connection 2” on the previous page.

5Plug the AC power cords of the VCR, TV and the center unitt into the AC outlets.

6When turning on the TV for the first time after the AV COMPU LINK connection, turn the TV volume to the minimum using the TV volume control on the TV.

7Turn on the connected components first, then turn on the center unit.

•When turning on the VCR, use the remote control

supplied with this system–press VCR .

Available functions

The AV COMPU LINK remote control system allows you to use the functions listed below.

One-touch video play

Simply by inserting a video cassette without its safety tab into the VCR, you can enjoy the video playback without setting other switches manually. This system automatically turns on and changes the source to VCR .

The TV automatically turns on and changes the input mode to the appropriate position so that you can view the playback picture.

When you insert a video cassette with its safety tab, press the play (3) button on the VCR or on the remote control. So, you can get the same result.

One-touch DVD play

Simply by starting playback on the built-in DVD player, you can enjoy the playback without setting other switches manually. The TV automatically turns on and changes the input mode to the appropriate position so that you can view the playback picture.

Automatic selection of TV’s input mode

When you select DVD, VCR, or DBS as the source to play on the center unit, the TV automatically changes the input mode to the appropriate position so that you can view the playback picture.

Automatic Power On/Off

The TV and VCR turn on and off along with the center unit.

When you turn on the center unit;

•If the previously selected source is “DVD,” only the TV will turn on automatically.

•If the previously selected source is “VCR ,” the TV and VCR will turn on automatically.

When you turn off the center unit, the TV and VCR will turn off.

NOTE:

If you turn off the center unit while recording on the VCR, the VCR will not turn off, but continue recording.

61