Miele T 8005 Frequently asked questions, What if the dryer will not run? Possible fault Solution

Page 18

Frequently asked questions

What if the dryer will not run?

Possible fault	Solution

The "Start/Stop" button was not	Make sure the dryer is on. Press the "Start/
pressed.	Stop" button to begin the drying program.

The circuit breaker tripped or	Make sure the dryer is plugged in or reset the
the dryer is unplugged.	circuit breaker.

The door is not closed.	Close the door properly.

How do I prevent static cling?

Add fabric softener to laundry when washing or select the "Less Dry" setting on the dryer.

What if the drum light does not come on?

Possible fault	Solution

The bulb may be bad or burned	See "Changing the light bulb."
out.

What if the "Child Lock" indicator flashes after turning the dryer on and a program cannot be started?

Possible fault	Solution

The child lock is activated.	Deactivate the child lock. See "Child Lock."

What if the program stops, the "Anti-crease / End" indicator lights and the buzzer sounds?

Possible fault	Solution

The drum is empty.	Load laundry into the dryer. The dryer will not
	operate if the drum is empty. Single items
	should be dried with "Sturdy" or a timed
	program. For dry items use the "Fluff" program.

What if the "Filter/Vent" fault indicator is lit?
Possible fault	Solution

The lint filter is clogged.	Clean the lint filters. See "Dryer care".

The exhaust hose or the	Remove lint and check the exhaust system for
connection is clogged with lint.	blockages.

The air supply in the room is	Open a window or door to increase airflow.
insufficient.

18

Image 18

Contents Vented Dryer 8002 T 8003 T Contents Important Safety Instructions This dryer is intended for residential use only Grounding InstructionsControl panel Before loading the dryer Program recommendationsUsing the dryer Turn on the dryer and load the laundrySelect a program Program When to use Extra DryFull load Select a drying option if neededTurbo GentleTo adjust the buzzer volume Select the dryness levelSelect the buzzer if desired Start the program At the end of a programCanceling or changing a program Adding or removing laundry during a programTo activate the child lock Child lockChild lock To deactivate the child lockCleaning the lint filters Dryer careCleaning the grille filters Cleaning the exterior and the control panel Cleaning the drumChanging the light bulb What if the Filter/Vent fault indicator is lit? Frequently asked questionsWhat if the dryer will not run? Possible fault Solution Possible fault SolutionWhat if the laundry is not dry enough? Possible fault Repairs After sales servicePC Update MieleCareQuick Guide Remove this guide for easy referenceSelect a program Quick GuideTurn on the dryer and load the laundry Select a drying option if desiredQuick Guide At the end of a programFor uniform loads, e.g. sheets Underwear, socks Installation Instructions Important Safety Instructions Save These Instructions Height of vent adapter in a stacked installation Washer / Dryer StackElectrical connection Installation Transporting the dryer to the installation site InstallationInstallation site Rear viewInstallation beneath a counter Reinstallation of the machine lidLeveling the dryer Determining the position of the exhaust connectionChanging the position of the exhaust connection Installation tips Room ventilationExhaust connection Window connectionWall connection with rigid pipe Direct wall connection Dryer top viewHow to calculate the effective duct length Tips about the duct work Additional duct lengths 4 rigid pipe only Length Caring for the environment Disposal of the packing materialsDisposal of an appliance Page