Miele T 1515 operating instructions Electrical connection, This appliance must be grounded

Page 19

INSTALLATION INSTRUCTIONS

Grounding and Electrical con- nection

Grounding instructions

This appliance must be grounded.

In the event of a malfunction, ground- ing will reduce the risk of electric shock by providing a path of least resistance for the electric current. This appliance is equipped with a cord having an equipment grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and or- dinances.

Warning

Improper connection of the equip- ment-grounding conductor can re- sult in a risk of electric shock.

Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded.

Do not modify the plug provided with the appliance; if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

Electrical connection

This installation should be done by an experienced and qualified person, in most cases a licensed electrician, in ac- cordance with local codes and regula- tions.

This dryer is supplied with a 1.5 m power cord with a 3-pole, 4 wire grounding plug, 14-30P (regular Canadian dryer plug).

This plug has to be plugged into a 3-pole, 4 wire grounding receptacle, 14-30R (regular Canadian dryer receptacle).

The receptacle has to be connected to Line 1, Line 2, Neutral and Ground wires. The voltage is 120/240 V AC or 120/208 V AC.

“EASY INSTALLATION KIT”

If you do not have a designated line,

4 wire, 120/240 V – 15 or 30 Amps, for this appliance, but you have the 4 wire, 120/(208)240 V – 30 Amp Canadian dryer wall receptacle (14-30 R) you can use the Miele Double Receptacle Box. This consists of two standard recep- tacles 14-30 R, 4 fuses, box and plug cord, which allows you to use that single dryer wall receptacle to supply power to a Miele washer and Miele dryer. Both machines may operate at the same time because each uses maximum about 15 A current.

For more information on the electrical connection on the Miele Double Recep- tacle Box please contact:

your Miele dealer

the nearest Miele Service Depart- ment.

19

Image 19
Contents Operations Manual for the T 1515 Vented Dryer Contents Guide to the machine Pushbuttons Indicator lampsImportant Safety Instructions Important Safety Instructions Disposal of the packing ma- terial Your contribution to the environmentDisposal of your old machine Unloading the machine Loading the machineFollowing fabrics should not be dried in a tumble dryer Program selection To change a program during drying Correct procedureProgram is cancelled if To select a programMachine iron ProgramsNormal Hand iron rrCool Normal +Hand iron WarmCleaning the dryer Cleaning and care Cleaning the lint filtersWhat to do if, . . . ? Cause Remedy Problem solving guideIng the drying cycle? Event of a power Failure?To function? To open the door in the event of a power failure Specimen After-sales serviceThis appliance must be grounded Electrical connectionWhere to install the machine InstallationExhaust connection can be made Installation ventingType of bend Angle Radius in mm Additional duct To calculate the effective duct length TabelResult ExampleEffective duct Internal diameter or Length m Dryer-top view Wall vent kit exampleDryer-side view Wire spiral-wound hose Load Final spin speed Electrical Drying time incl Consumption dataCottons Permanent PressTechnical data