Miele T 1515 operating instructions Loading the machine, Unloading the machine

Page 8

OPERATING INSTRUCTIONS

WARNING - To reduce the risk of fire, electric shock, or injury to persons, read the IMPORT-

ANT SAFETY INSTRUCTIONS before operating this appliance.

Loading the machine

Load the laundry loosely into the drum.

Duvet covers and pillowcases should be fastened before drying in order to prevent small items from roll- ing inside of them.

Important: Check that laundry can- not be trapped by the door as this may cause damage to the fabric.

Unloading the machine

If the wash is not removed at the end of the drying program, the machine will automatically enter the anti- crease cycle for 60 minutes. This en- tails the drum being rotated at short intervals in order to reduce the forma- tion of creases.

Once the laundry has been removed, check that the drum is empty. Any items left in the drum could be damaged through over- drying during the next program.

Clean the lint filter after each drying cycle to prevent excessive energy consumption, longer program times and the risk of fire.

The door should always be closed after use.

8

Image 8
Contents Operations Manual for the T 1515 Vented Dryer Contents Guide to the machine Indicator lamps PushbuttonsImportant Safety Instructions Important Safety Instructions Disposal of your old machine Your contribution to the environmentDisposal of the packing ma- terial Loading the machine Unloading the machineFollowing fabrics should not be dried in a tumble dryer Program selection Correct procedure Program is cancelled ifTo select a program To change a program during dryingPrograms NormalHand iron rr Machine ironNormal + Hand ironWarm CoolCleaning and care Cleaning the lint filters Cleaning the dryerProblem solving guide What to do if, . . . ? Cause RemedyTo function? Event of a power Failure?Ing the drying cycle? To open the door in the event of a power failure After-sales service SpecimenElectrical connection This appliance must be groundedInstallation Where to install the machineInstallation venting Exhaust connection can be madeTo calculate the effective duct length Tabel Type of bend Angle Radius in mm Additional ductEffective duct Internal diameter or Length m ExampleResult Dryer-side view Wall vent kit exampleDryer-top view Wire spiral-wound hose Consumption data CottonsPermanent Press Load Final spin speed Electrical Drying time inclTechnical data