Miele T 1515 operating instructions Pushbuttons, Indicator lamps

Page 4

Guide to the machine

Pushbuttons

Door

This button is used to open the door (does not stay pushed in).

ON / OFF

When the machine is turned on, the “On” indicator will light up if the door is closed. If the door is open, the drum light will be on.

Buzzer

Allows the buzzer to sound when the drum rotates during the anti-crease cycle.

Load size - Full / Half

To dry a standard size load at peak efficiency, press this button before starting the drying cycle.

Start

Starts the selected program (does not stay pushed in).

Indicator lamps

PROGRAM SEQUENCE

The program sequence indicator lamps show the current state of the drying program.

DRYING STAGE REACHED These indicator lamps show which drying stage the program has reached. For program stages “Nor- mal” and “Extra dry” the indicator lamp remains at the “Normal” posi- tion.

PROGRAM SETTING-SELECTOR

Set the required program by turning the knob either clockwise or counter- clockwise.

COTTONS

PERMANENT PRESS

TIMED DRYING

Items can be either dried for 20 minutes (incl. a cooling-down phase) or cool air fluffed for 15 minutes.

4

Image 4
Contents Operations Manual for the T 1515 Vented Dryer Contents Guide to the machine Indicator lamps PushbuttonsImportant Safety Instructions Important Safety Instructions Disposal of the packing ma- terial Your contribution to the environmentDisposal of your old machine Loading the machine Unloading the machineFollowing fabrics should not be dried in a tumble dryer Program selection Correct procedure Program is cancelled ifTo select a program To change a program during dryingPrograms NormalHand iron rr Machine ironNormal + Hand ironWarm CoolCleaning and care Cleaning the lint filters Cleaning the dryerProblem solving guide What to do if, . . . ? Cause RemedyIng the drying cycle? Event of a power Failure?To function? To open the door in the event of a power failure After-sales service SpecimenElectrical connection This appliance must be groundedInstallation Where to install the machineInstallation venting Exhaust connection can be madeTo calculate the effective duct length Tabel Type of bend Angle Radius in mm Additional ductResult ExampleEffective duct Internal diameter or Length m Dryer-top view Wall vent kit exampleDryer-side view Wire spiral-wound hose Consumption data CottonsPermanent Press Load Final spin speed Electrical Drying time inclTechnical data