Miele T 1515 operating instructions Wire spiral-wound hose

Page 25

Installation - venting

Fig. 1

Ducting (side view) with flexible vent hose to an exhaust flue.

1.

Wall vent duct

A. Wire spiral-wound hose

2.

Adapter

B. Flexible ducting

3.

Flue isulated against damp

Fig. 2

Ducting (side view) with plastic piping to a wall vent kit.

1.Wall vent kit

2.Adapter

3.Drain pipe (outer dia. 110 mm)

Fig. 3

Connection of piping to the tumble dryer.

1.Drain pipe

2.Adapter for vent duct between tumble dryer and plastic drain pipe

Fig.4

Height of vent outlet for washer dryer stack.

25

Image 25
Contents Operations Manual for the T 1515 Vented Dryer Contents Guide to the machine Pushbuttons Indicator lampsImportant Safety Instructions Important Safety Instructions Disposal of the packing ma- terial Your contribution to the environmentDisposal of your old machine Unloading the machine Loading the machineFollowing fabrics should not be dried in a tumble dryer Program selection Program is cancelled if Correct procedureTo select a program To change a program during dryingNormal ProgramsHand iron rr Machine ironHand iron Normal +Warm CoolCleaning the dryer Cleaning and care Cleaning the lint filtersWhat to do if, . . . ? Cause Remedy Problem solving guideIng the drying cycle? Event of a power Failure?To function? To open the door in the event of a power failure Specimen After-sales serviceThis appliance must be grounded Electrical connectionWhere to install the machine InstallationExhaust connection can be made Installation ventingType of bend Angle Radius in mm Additional duct To calculate the effective duct length TabelResult ExampleEffective duct Internal diameter or Length m Dryer-top view Wall vent kit exampleDryer-side view Wire spiral-wound hose Cottons Consumption dataPermanent Press Load Final spin speed Electrical Drying time inclTechnical data