Miele T 4423 C Problem Possible cause Remedy There is a build up, Fluff, Laundry is not, Aperture

Page 28

Problem solving guide

Problem	Possible cause	Remedy
There is a build up	Fluff is principally the result	Fluff is collected by the fluff
of fluff.	of friction when garments	filters and can be easily
	are being worn and	removed (see "Cleaning
	washed. Machine drying	and Care").
	hardly causes any fluff to
	form and has been
	established by research
	institutes to have no effect
	on the lifetime of fabric.
The laundry is not	The load consisted of	– Finish drying using
sufficiently dry.	different fabrics.	"Timed drying - Warm
		air".
		– Select a more suitable
		drying programme next
		time (see "Programme
		chart").
There are water	A double filter system with	Laundry being removed
droplets at the upper	dual insulation prevents fluff	from the machine may
edge of the drum	from being deposited in the	come into contact with
aperture.	condenser unit. This	these water droplets, but
	insulation can lead to a	they will dry off in a matter
	build-up of condensation.	of minutes.

28

Image 28

Contents Operating instructions For condenser tumble dryer T 4423 C Contents Contents Technical safety Correct useOperation Using accessories Caring for the environment Disposal of the packing materialDisposal of your old machine Energy saving tipsControl panel / Features DAdditional option buttons Indicator lampsGuide to the appliance DisplayTime left display for Cottons and Minimum Iron programmes Future updatesElectronic lock and programmable functions Tips on drying Wash care labelsProgramme chart Warm air Programme Fabric type Special notesCool air Hand care SmoothingLoad the drum and switch on the dryer How to dry correctlyPrepare the laundry Selecting a programme Selecting additional options Anti-creaseDelay start Low temperatureShort BuzzerClean out airways indicator lamp Starting a programmeAfter drying Additional notesBrief instructions To cancel a programme and select a different programme To change a programmeTo interrupt a programme Adding or removing itemsTo activate the system lock Electronic system lockTo de-activate the system lock Cleaning and care Emptying the condensed water containerCleaning the fluff filters Cleaning them whilst dryCleaning the tumble dryer Cleaning them with waterCleaning the condenser unit Removing the condenser unit Cleaning the condenser unit Checking the condenser unitReplacing the condenser unit Problem solving guide Problem Possible cause Remedy There is a build up FluffLaundry is not Sufficiently dryEven switches off Problem Possible cause Remedy Drying processGoes on too long or Problem Possible cause Remedy Condenser unit Service panel willBeen cleaned Interior drum Finish indicatorProblem Possible cause Remedy Stops and the CleanAirways lamp comes FlashesProblem Possible cause Remedy Programme has Symbols flashBeen interrupted Flashing,To change the interior drum lamp After sales service Future updates PCOptional accessories RepairsInstallation Front viewTransporting the machine to its installation site Installation siteReplacing the lid Before moving the machine again e.g. when moving house Aligning the machineRoom in which the dryer is located Washer dryer stackExternal condensed water outlet Pulling out the drain hoseConnection to a sink drain outlet Electrical connection Electrical connection U.K. Non-rewireable plugs BSElectrical connection U.K Must be Earthed Consumption data CottonsTechnical data Page Programmable functions for changing standard settings Programmable functions Increased drying levelProgramming and storing in memory To checkMemory Alteration rights reserved/0504