How to dry correctly
F Starting a programme
^Press the Start button. The drying cycle begins.
The drying stage reached is shown by the sequence indicator lamps on the right hand side of the control panel.
At the end of the drying phase, a cooling down phase commences to cool the laundry down (the Cool air indicator lamp lights up).
The drying level required has now been reached.
G After drying
The
0 will then appear in the display.
^Press the Door button to open the drum door.
^Remove the laundry.
Make sure that the drum is empty. If items are left in the dryer, they could be damaged by overdrying when the dryer is next used.
^After every cycle remove the fluff from the fluff filter in the door and in the door opening (see "Cleaning and Care").
^Empty the condensed water container (where there is no external drainage of the water).
^The condenser unit should be checked an cleaned on a regular basis.
See "Cleaning and Care".
^After each use, switch the dryer off by pressing the
^Always close the door after use.
Additional notes
. . . Clean out airways indicator lamp
This indicator lamp comes on to warn you that the dryer is not working efficiently.
This may be because:
–the fluff filters are clogged;
–the condenser unit is clogged.
17