Miele T 4423 C operating instructions Correct use, Technical safety

Page 4

Warning and Safety instructions

To avoid the risk of accidents and damage to the machine please read these instructions carefully before using it for the first time. They contain important information on its safety, use and maintenance.

Keep these operating instructions in a safe place and ensure that new users are familiar with the content. Pass them on to any future owner of the machine.

Correct use

The tumble dryer is only intended for drying fabrics which have been

washed in a water solution, marked on the manufacturer's wash care label as being suitable for tumble drying.

"Dry Cleaning Kits" for freshening up garments in a tumble dryer are increasingly available on the market. If using, do so at your own risk and follow the instructions provided on the packaging.

Any other applications may be dangerous. The manufacturer is not liable for damage resulting from improper use or operation.

This machine is not a toy! To avoid the risk of injury, do not allow children to play on or near it, or to play with the controls. Supervise its use by the elderly or infirm.

Technical safety

Before setting up the machine check it for any externally visible

damage. Do not install or use a damaged machine.

Before connecting the machine, ensure that the connection data on

the data plate (fusing, voltage and frequency) matches the mains electricity supply. If in any doubt, consult a qualified electrician.

The electrical safety of this machine can only be guaranteed

when continuity is complete between the machine and an effective earthing system which complies with local and national regulations. It is most important that this basic safety requirement is regularly tested, and where there is any doubt the household wiring system should be inspected by a qualified electrician. The manufacturer cannot be held liable for the consequences of an inadequate earthing system (e.g. electric shock).

Do not connect the machine to the mains electricity supply by an

extension lead. Extension leads do not guarantee the required safety of the machine (e.g. danger or overheating).

The machine is built in accordance with current safety requirements.

Unauthorised repairs could result in unforeseen dangers for the user, for which the manufacturer cannot accept liability. Repairs should only be undertaken by a Miele approved technician.

Ensure current is not supplied to the machine while maintenance or repair work is being carried out.

Faulty components must only be exchanged for Miele original spare

parts. Only when these parts are fitted can the safety standards of the machine be guaranteed.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Operating instructions For condenser tumble dryer T 4423 C Contents Contents Technical safety Correct useOperation Using accessories Caring for the environment Disposal of the packing materialDisposal of your old machine Energy saving tipsControl panel / Features DAdditional option buttons Indicator lampsGuide to the appliance DisplayTime left display for Cottons and Minimum Iron programmes Future updatesElectronic lock and programmable functions Tips on drying Wash care labelsProgramme chart Warm air Programme Fabric type Special notesCool air Hand care SmoothingLoad the drum and switch on the dryer How to dry correctlyPrepare the laundry Selecting a programme Selecting additional options Anti-creaseDelay start Low temperatureShort BuzzerClean out airways indicator lamp Starting a programmeAfter drying Additional notesBrief instructions To cancel a programme and select a different programme To change a programmeTo interrupt a programme Adding or removing itemsTo activate the system lock Electronic system lockTo de-activate the system lock Cleaning and care Emptying the condensed water containerCleaning the fluff filters Cleaning them whilst dryCleaning the tumble dryer Cleaning them with waterCleaning the condenser unit Removing the condenser unitCleaning the condenser unit Checking the condenser unitReplacing the condenser unit Problem solving guide Problem Possible cause Remedy There is a build up FluffLaundry is not Sufficiently dryEven switches off Problem Possible cause Remedy Drying processGoes on too long or Problem Possible cause Remedy Condenser unit Service panel willBeen cleaned Interior drum Finish indicatorProblem Possible cause Remedy Stops and the CleanAirways lamp comes FlashesProblem Possible cause Remedy Programme has Symbols flashBeen interrupted Flashing,To change the interior drum lamp After sales service Future updates PCOptional accessories RepairsInstallation Front viewTransporting the machine to its installation site Installation siteReplacing the lid Before moving the machine again e.g. when moving house Aligning the machineRoom in which the dryer is located Washer dryer stackExternal condensed water outlet Pulling out the drain hoseConnection to a sink drain outlet Electrical connection Electrical connection U.K. Non-rewireable plugs BSElectrical connection U.K Must be Earthed Consumption data CottonsTechnical data Page Programmable functions for changing standard settings Programmable functions Increased drying levelProgramming and storing in memory To checkMemory Alteration rights reserved/0504

T 4423 C specifications

The Miele T 4423 C is a premium tumble dryer that combines cutting-edge technology with user-friendly features, designed to deliver exceptional drying results while ensuring the utmost care for fabrics. This model is renowned for its reliability, efficiency, and versatility, making it a popular choice among homeowners.

One of the standout features of the Miele T 4423 C is its Temperature Selection with a variety of heat settings. This allows users to choose the optimal drying temperature for different fabric types, ensuring that delicate items are treated with care. The dryer also incorporates Miele’s unique FragranceDos technology, allowing users to infuse their laundry with a pleasant scent using specially formulated fragrance capsules.

The Miele T 4423 C is equipped with a robust and efficient heat pump system, which not only reduces energy consumption but also ensures gentle drying. This system recycles the hot air used in the drying process, making it one of the most energy-efficient models available on the market. It boasts an impressive energy rating, making it an environmentally friendly choice that helps save on utility bills.

Another key highlight of the T 4423 C is its PerfectDry moisture monitoring system. This intelligent technology measures the moisture levels within the drum and automatically adjusts the drying time accordingly. This feature helps prevent over-drying, preserving the quality of clothes while ensuring they are perfectly dry and ready to wear.

In terms of capacity, the Miele T 4423 C offers a generous drum size, accommodating large loads of laundry without compromising drying effectiveness. The innovative honeycomb drum design provides a gentle yet effective drying process, minimizing wear and tear on fabrics.

The dryer is also equipped with a user-friendly control panel featuring clearly labeled buttons and a backlit display. This simplifies operation and allows users to easily select their desired programs. With a range of drying programs, including options for cottons, synthetics, and delicates, the Miele T 4423 C caters to a wide variety of laundry needs.

Furthermore, Miele’s commitment to quality and durability is evident in the T 4423 C, which is built to last and undergoes rigorous testing to ensure long life and performance. With its blend of innovative technologies, energy efficiency, and thoughtful design, the Miele T 4423 C stands as an excellent investment for modern households seeking optimal laundry care.
Top Page Image Contents