Miele T 4423 C Problem Possible cause Remedy Condenser unit, Service panel will, Not shut

Page 30

Problem solving guide

Problem

Possible cause

Remedy

The condenser unit

The inner cover of the

– Ensure that the condenser

service panel will

condenser unit has not

unit is positioned correctly

not shut.

been locked properly

and lock the cover.

 

and/or the condenser unit

– Check the rubber seals.

 

has not been positioned

 

 

correctly.

 

Water leaks from the

Fluff has collected at the

– Use a cloth to remove any

machine after the

bottom of the condenser

fluff from the inside of the

condenser unit has

unit housing.

condenser unit housing.

been cleaned.

 

 

The interior drum

The lighting switched off

The lighting only comes on

lighting does not

automatically.

when the door is opened if

come on.

 

the dryer is switched on. To

 

 

save energy the lighting

 

 

goes out after a while if the

 

 

door is left open.

 

The lamp needs changing.

Change the lamp as

 

 

described at the end of this

 

 

section.

The ring around the

The lighting switched off

It lights up when drying is in

programme selector

automatically.

progress and goes out

does not light up.

 

shortly after the end of the

 

 

programme to save energy.

Check and fault indicator lamps

 

 

 

 

Problem

Possible cause

Remedy

The Anti-crease /

The programme selector

Turn the selector back to the

Finish indicator

was moved after the start

original position and the

lamp flashes while

of a programme. The

indicator lamp will go out.

drying is in

programme continues to

 

progress.

run as normal.

 

The Locked

The system lock is

If you wish to use the dryer,

indicator lamp

activated.

the system lock must be

flashes when the

 

deactivated (see "Electronic

machine is switched

 

system lock").

on and the

 

 

programme cannot

 

 

be started.

 

 

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Operating instructions For condenser tumble dryer T 4423 C Contents Contents Technical safety Correct useOperation Using accessories Disposal of your old machine Caring for the environmentDisposal of the packing material Energy saving tipsGuide to the appliance Control panel / FeaturesDAdditional option buttons Indicator lamps DisplayFuture updates Time left display for Cottons and Minimum Iron programmesElectronic lock and programmable functions Tips on drying Wash care labelsProgramme chart Programme Fabric type Special notes Warm airCool air Hand care SmoothingHow to dry correctly Load the drum and switch on the dryerPrepare the laundry Selecting a programme Selecting additional options Anti-creaseShort Delay startLow temperature BuzzerAfter drying Clean out airways indicator lampStarting a programme Additional notesBrief instructions To interrupt a programme To cancel a programme and select a different programmeTo change a programme Adding or removing itemsElectronic system lock To activate the system lockTo de-activate the system lock Cleaning and care Emptying the condensed water containerCleaning the fluff filters Cleaning them whilst dryCleaning the tumble dryer Cleaning them with waterCleaning the condenser unit Removing the condenser unitCleaning the condenser unit Checking the condenser unitReplacing the condenser unit Problem solving guide Laundry is not Problem Possible cause Remedy There is a build upFluff Sufficiently dryProblem Possible cause Remedy Drying process Even switches offGoes on too long or Been cleaned Interior drum Problem Possible cause Remedy Condenser unitService panel will Finish indicatorAirways lamp comes Problem Possible cause RemedyStops and the Clean FlashesBeen interrupted Problem Possible cause Remedy Programme hasSymbols flash Flashing,To change the interior drum lamp Optional accessories After sales serviceFuture updates PC RepairsInstallation Front viewInstallation site Transporting the machine to its installation siteReplacing the lid Room in which the dryer is located Before moving the machine again e.g. when moving houseAligning the machine Washer dryer stackExternal condensed water outlet Pulling out the drain hoseConnection to a sink drain outlet Electrical connection U.K. Non-rewireable plugs BS Electrical connectionElectrical connection U.K Must be Earthed Consumption data CottonsTechnical data Page Programmable functions for changing standard settings Programming and storing in memory Programmable functionsIncreased drying level To checkMemory Alteration rights reserved/0504

T 4423 C specifications

The Miele T 4423 C is a premium tumble dryer that combines cutting-edge technology with user-friendly features, designed to deliver exceptional drying results while ensuring the utmost care for fabrics. This model is renowned for its reliability, efficiency, and versatility, making it a popular choice among homeowners.

One of the standout features of the Miele T 4423 C is its Temperature Selection with a variety of heat settings. This allows users to choose the optimal drying temperature for different fabric types, ensuring that delicate items are treated with care. The dryer also incorporates Miele’s unique FragranceDos technology, allowing users to infuse their laundry with a pleasant scent using specially formulated fragrance capsules.

The Miele T 4423 C is equipped with a robust and efficient heat pump system, which not only reduces energy consumption but also ensures gentle drying. This system recycles the hot air used in the drying process, making it one of the most energy-efficient models available on the market. It boasts an impressive energy rating, making it an environmentally friendly choice that helps save on utility bills.

Another key highlight of the T 4423 C is its PerfectDry moisture monitoring system. This intelligent technology measures the moisture levels within the drum and automatically adjusts the drying time accordingly. This feature helps prevent over-drying, preserving the quality of clothes while ensuring they are perfectly dry and ready to wear.

In terms of capacity, the Miele T 4423 C offers a generous drum size, accommodating large loads of laundry without compromising drying effectiveness. The innovative honeycomb drum design provides a gentle yet effective drying process, minimizing wear and tear on fabrics.

The dryer is also equipped with a user-friendly control panel featuring clearly labeled buttons and a backlit display. This simplifies operation and allows users to easily select their desired programs. With a range of drying programs, including options for cottons, synthetics, and delicates, the Miele T 4423 C caters to a wide variety of laundry needs.

Furthermore, Miele’s commitment to quality and durability is evident in the T 4423 C, which is built to last and undergoes rigorous testing to ensure long life and performance. With its blend of innovative technologies, energy efficiency, and thoughtful design, the Miele T 4423 C stands as an excellent investment for modern households seeking optimal laundry care.
Top Page Image Contents