Whirlpool 66161279 Air Conditioner Care, Changing Air Direction, Cleaning the Air Filter, Power

Models: 66161279

1 60
Download 60 pages 57.45 Kb
Page 16
Image 16
Storing the Remote Control

Storing the Remote Control

Store the remote control by placing the back side, containing a magnet, against the side of the air conditioner cabinet in the locations shown in the following illustration.

NOTE: The dotted lines do not appear on the unit cabinet. They show the locations of the metal plates in the illustration only.

Power

1.Press POWER to turn on air conditioner.

2.Press POWER again to turn off the air conditioner.

Power

Mode

Press MODE to choose Cool, Eco (on some models), Overnight (on some models) or Fan Only.

Mode

Fan Speed

1.Press FAN SPEED until you see the Bar LED on the air conditioner control panel display for the desired setting.

2.Choose Low, Medium, High or Auto.

NOTES:

Auto fan speed and Temperature cannot be selected in Fan Only mode.

In Eco (on some models) and Cool modes, Auto fan speed is selected automatically.

Temperature

Press the up arrow button to raise the temperature. Each time you press or hold the up arrow button, the temperature will go up 1ºF (1ºC) until it reaches 86°F (30°C).

V

V

Press the down arrow button to lower the temperature. Each time you press or hold the down arrow button, the temperature will go down 1ºF (1ºC) until it reaches 61°F (16°C).

Changing Air Direction

Use tab to direct the air right or left.

A

A. Tab

AIR CONDITIONER CARE

Your new air conditioner is designed to give you many years of dependable service. This section tells you how to clean and care for your air conditioner properly. Call your local authorized dealer for an annual checkup. Remember … the cost of this service call is your responsibility.

Cleaning the Air Filter

The air filter is removable for easy cleaning. A clean filter helps remove dust, lint, and other particles from the air and is important for best cooling and operating efficiency. Check the filter every 2 weeks to see whether it needs cleaning.

NOTE: Do not operate the air conditioner without the filter in place.

1.Turn off the air conditioner.

2.Remove the air filter by pressing down on the tabs on the air intake grille and pulling the grille away from the air

conditioner.

Fan Speed

NOTE: After 5 seconds, the display on the air conditioner control panel will show the current room temperature.

16

Page 16
Image 16
Whirlpool 66161279 manual Air Conditioner Care, Changing Air Direction, Cleaning the Air Filter, Power, Mode, Fan Speed