Whirlpool 66161279 manual Attach Side Curtains to Window, Side Curtain Screws, curtain

■The place where the power cord exits the air conditioner should be no more than 6 ft (183 cm) from a grounded outlet.

■Do not block the air intake or discharge louvers in the front panel.

■Do not block the louvers on the outside of the air conditioner.

1.Using 2 or more people, gently place the air conditioner into the window and center it according to the center line marked earlier. Check that the bottom channel of the air conditioner is against the windowsill.

Attach Side Curtains to Window

1.Pull the right-hand curtain out until it fits into the window channel.

2.Use a ¹⁄₈" drill bit to drill a starter hole through the top hole in the side curtain and into the window sash.

A

	B
C	D
A. Air conditioner	C. Windowsill
B. Bottom channel	D. Outside

2.Lower the window sash behind the top channel to hold the air conditioner in place.

NOTE: Your model may differ from the one shown.

3.Insert one of the ³⁄₄" screws through the top hole of the right- hand curtain and into the window sash.

4.Use a ¹⁄₈" drill bit to drill a starter hole through either the bottom or side holes in the right-hand curtain and into the windowsill or frame.

5.Insert one of the ³⁄₄" screws through the hole drilled in Step 4.

A

Side Curtain Screws

A

B

	C
	A. Optional screws
A. Side curtain against window channel	6. Repeat steps 1 through 5 for attachment of the left-hand
B. Window sash behind top channel	curtain.
C. Bottom channel in behind windowsill

8