Attach Side Curtains to
1.Slide the side bracket over the bottom of the
2.Use ¹⁄₈" drill bit to drill a starter hole through the hole in the side bracket and into the windowsill.
3.Using a ³⁄₄" screw, attach the side bracket to the windowsill.
4.Repeat for side bracket installation on the
Complete Installation
1.Insert the foam seal without adhesive strip behind the top of the lower window sash and against the glass of the upper window.
A
B
A. Top of lower window sash
B. Foam seal
2.Use ¹⁄₈" drill bit to drill a starter hole through the hole in the top channel and into the window sash.
3.Attach the top channel to the window sash with a ³⁄₄" screw to secure the window.
4.Place the window lock bracket as shown. Use a ¹⁄₈" drill bit to drill a starter hole through the hole in the window lock bracket and into the upper window.
5.Attach the window lock bracket to the upper window with one ³¹⁄₃₂" screw to secure the window in place.
AB
A. Window lock bracket
B. Upper window
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
6.Plug into a grounded 3 prong outlet.
7.Press RESET on the power supply cord. See “Electrical Requirements.”
8.Remove the clear plastic film from the control panel and plastic front.
12
