Timer
To set a 1 to
1.Press TIMER. The display will show remaining hours before the air conditioner will turn off.
2.Press the up or down arrow button to change the delay time from 1 to 24 hours.
3.Press TIMER again while the time remaining is shown on the display or wait 5 seconds for the unit to automatically save the settings.
NOTE: When the air conditioner turns off, the red LED on the Power button lights for Standby mode. The Timer LED turns off.
4.To view the time remaining before the air conditioner turns off, press TIMER once. Pressing Timer again while the time remaining is shown on the display will cancel the setting.
Set the air conditioner to turn on, keeping the previous settings:
1.Turn off the air conditioner.
2.Press TIMER. The display will show remaining hours before the air conditioner will turn on.
3.Press the up or down arrow button to change the delay time from 1 to 24 hours.
4.Press TIMER again while the time remaining is shown on the display, or wait 5 seconds for the unit to automatically save the settings. The display will show the current room temperature. The Timer LED will remain on.
5.To view the time remaining before the air conditioner turns on, press TIMER once. Pressing Timer again while the time remaining is shown on the display will cancel the setting.
Set the air conditioner to turn on, changing the previous settings:
1.Adjust the mode to Cool, Eco (on some models), Overnight (on some models) or Fan Only.
2.Press the up or down arrow button to set the temperature between 61ºF and 86ºF (16ºC and 30ºC).
3.Adjust the fan speed to Low, Medium, High or Auto.
NOTES:
■Auto fan speed and Temperature cannot be selected in Fan Only mode.
■In Eco (on some models) and Cool modes, Auto fan speed is selected automatically.
4.Turn off the air conditioner.
5.Press TIMER. The display will show the remaining hours before the air conditioner will turn on.
6.Press the up or down arrow button to change the delay time from 1 to 24 hours.
7.Press TIMER again while the time remaining is shown on the display, or wait 5 seconds for the unit to automatically save the settings. The Timer LED will remain on.
8.To view the time remaining before the air conditioner turns on, press TIMER once. Pressing Timer again while the time remaining is shown on the display will cancel the setting.
Cancel Timer:
Press TIMER twice to cancel the Timer.
Timer
Using the Remote Control
NOTE: Remote control may differ in appearance.
Power
To remove the battery, place the remote control face down. Using your thumbnail, press and hold the tab to release the battery door, and pull out battery door with your index finger.
To reinstall the battery, place the battery into the battery door as shown in the following illustration, matching the positive (+) side of the battery with the positive (+) side of the battery door. Slide the battery door into the remote control.
Mode | Fan Speed |
| V |
V
A
A. Tab
®
NOTE: One CR2025 battery (included) powers the remote control. Replace battery after 6 months of use, or when the blue light flashes 5 times every 10 minutes.
15
