Complete Installation
1.Insert the foam seal without adhesive strip behind the top of the lower window sash and against the glass of the upper window.
A
B
A. Top of lower window sash
B. Foam seal
2.Place the window lock bracket as shown. Use a ¹⁄₈" drill bit to drill a starter hole through the hole in the window lock bracket and into the upper window.
3.Attach the window lock bracket to the upper window with one ³⁄₄" screw to secure the window in place.
AB
A. Window lock bracket
B. Upper window
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
4.Plug into a grounded 3 prong outlet.
5.Press RESET on the power supply cord. See “Electrical Requirements.”
6.Remove the clear plastic film from the control panel and plastic front.
INSTALLATION INSTRUCTIONS—10K BTU, 12K BTU
Unpack the Air Conditioner
WARNING
Excessive Weight Hazard
Use two or more people to move and install air conditioner.
Failure to do so can result in back or other injury.
■Remove the carton top and lift the air conditioner from the base pad.
■Remove tape and glue residue from surfaces before turning on the air conditioner. Rub a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.
■Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your air conditioner.
Remove Packaging Materials
■Handle the air conditioner gently while unpacking the unit.
■Cut the 4 plastic bands that secure the carton.
■Remove any packaging materials inserted into the side louvers.
■Dispose of/recycle packaging materials.
9