2.Press RESET (on some devices, a green light will turn on).
3.Press TEST (listen for click; Reset button will trip, and on some devices, a green light will turn off).
4.Press and release RESET (listen for click; Reset button will latch, and on some devices, a green light will turn on). The power supply cord is ready for operation.
NOTES:
■The Reset button must be pushed in for proper operation.
■The power supply cord must be replaced if it fails to trip when the test button is pressed or fails to reset.
■Do not use the power supply cord as an off/on switch. The power supply cord is designed as a protective device.
■A damaged power supply cord must be replaced with a new power supply cord obtained from the product manufacturer and must not be repaired.
■The power supply cord contains no user serviceable parts. Opening the
INSTALLATION
NOTE: Your model may differ from the one shown.
Unpack the Air Conditioner
WARNING
Excessive Weight Hazard
Use two or more people to move and install air conditioner.
Failure to do so can result in back or other injury.
Remove Packaging Materials
■Handle the air conditioner gently while unpacking the unit.
■Cut the 4 plastic bands that secure the carton.
■Remove the carton top and lift the air conditioner from the base pad.
■Remove tape and glue residue from surfaces before turning on the air conditioner. Rub a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.
■Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your air conditioner.
■Remove any packaging materials inserted into the side louvers.
■Dispose of/recycle packaging materials.
Prepare Air Conditioner for Installation
Install Top Channel
1.Remove the plastic covering the adhesive on the top channel seal and attach the seal to the top channel, lining up the holes in the seal and the top channel.
2.Place the top channel on the top of the air conditioner, lining up the holes in the top channel with the holes in the top of the air conditioner.
3.Using four ³⁄₈" screws, attach the top channel to the air conditioner.
A
B
A. ³⁄₈" screws
B. Top channel
Install Side Curtains
NOTE: Attach curtains to the air conditioner before placing the air conditioner in window.
1.Place the tabbed side of the side curtain in the track on the
A
B
A. Tabbed side of side curtain
B. Curtain frame
6
