Roland MMP-2 owner manual Windows Me

Models: MMP-2

1 61
Download 61 pages 47.4 Kb
Page 31
Image 31
Windows Me / 98

Use of computer and setup

OMS or FreeMIDI is a driver to let MacOS to communicate with external devices on MIDI protocol. USB-MIDI driver is the driver that makes the communication on OMS or FreeMIDI through USB possible.

You can download OMS from the Web site of Opcode Systems, Inc.

You can download FreeMIDI from the Web site of Mark of the Unicorn, Inc.

Windows Me / 98

Use the following procedure to install the MMP-2 driver.

*Disconnect the MMP-2 from your computer before starting up Windows.

*If the MMP-2 is already connected to your computer and a message of “Add New Hardware Wizard” is displayed, go to the MMP-2 Driver & Software CD-ROM, open the file Driver\WinMe_98\Readme_e.htm, and read the “Troubleshooting” section entitled “You attempted to install using the above procedure, but were not able to.”

1.With all USB cables disconnected, start up Windows. (except the keyboard and mouse)

2.Exit all applications before you begin installing the driver.

3.Insert the MMP-2 Driver & Software CD-ROM into the CD-ROM drive.

4.From the Windows Start menu, select “Run.”

Use of computer and setup

5.In the “Open” field of the dialog box that appears, enter “Q:\Driver\WinMe_98\Setupinf.exe” and click “OK.”

*Enter the drive name Q: appropriate for the drive name of your CD-ROM drive.

*To check the drive name of your CD-ROM drive, double-click the My Computer icon.

6.The SETUPINF dialog box will appear, and the display will indicate “Ready to install the driver.-”

*If the “Ready to install the driver.—” dialog box does not appear, go to the MMP-2 Driver & Software CD-ROM, open the file Driver\WinMe_98\Readme_e.htm, and read the section entitled “Installation.”

*If the display indicates “The driver is already installed.-”, you can connect the MMP-2’s USB cable to the computer and use it.

*If the display indicates “The driver was not deleted completely.-”, refer to “Deleting the MMP-2 Driver”(p. 32) to re-install it.

Q:\Driver\WinMe_98\Setupinf.exe

MMP-2

MMP-2.

Q:\DRIVER\WINME_98

31

Page 31
Image 31
Roland MMP-2 owner manual Windows Me