Use of computer and setup
7.Use the USB cable to connect the
As appropriate, switch the USB select switch to either the front or the rear position.
MMP-2
USB connector
USB cable
8.Turn on the power of the
*After you have made connections correctly, you must turn on the power in this step. If you fail to observe the correct sequence, the system may malfunction.
*To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections.
9.In some cases, the “Insert Disk” dialog box may appear. Click “OK.”
10.The “New Hardware Found” dialog box will appear. In the “Copy files from” area, input “Q:\Driver\WinMe_98” and click the “OK” button. Installation will be completed.
*Change the drive name Q: to match the drive name of your CD- ROM drive. For example if your
11.Click “OK” button in the “SETUPINF” dialog box.
'Roland
7
'Roland
Q:\Driver\WinMe_98
This completes the installation of the
Read “ReadMe” of adopted
Deleting the
If you were not able to install the
After deleting the driver, use the procedure described in “Windows Me / 98”(p. 31) to
For details on how to delete the driver, refer to the explanation provided in the
Windows 2000
Use the following procedure to install the
*Disconnect the
*To install the driver, you must log on to Windows as the Administrator or other user with the privileges of the Administrators group. For more information regarding this, consult your computer system administrator.
*The
32
