Roland MMP-2 owner manual Trouble Shooting about Computer, Windows users, Cannot shift to Suspend

Trouble Shooting about Computer

*Please read the “ReadMe” file in the MMP-2 Driver & Software CD-ROM. You can get any additional information not written in the owner’s manual from the “ReadMe” file.

Windows Users	p.43
Macintosh Users ....	p.44

Windows users

USB connections cannot be made correctly.

◆Has the MMP-2 been recognized?

Disconnect the USB cables, and then re-connect them.

It is possible that the computer has failed to recognize or initialize the MMP-2. Leave the USB cable connected to the MMP-2, and restart Windows. If connection still does not occur, exit Windows, and turn off the power of your computer. Then turn on the power of your computer and start Windows.

Cannot shift to Suspend*

◆Is an application which uses the MMP-2 running?

Exit the application which is using the MMP-2.

The computer cannot shift to Suspend mode if an application such as a sequencer is using the MMP-2.

What is Suspend?

This is a function which minimizes power consumption by shutting down the internal circuitry of the computer and the peripheral devices while the power remains supplied to the computer.

MMP-2 does not resume correctly from the suspended state

◆When suspended, was the MMP-2 still connected via the USB cable?

Disconnect the USB cable, and then re-connect it.

On some computers when Windows resumes from the suspended state, the MMP-2 may fail to resume. If this occurs, the USB cable connected to the MMP-2 should be disconnected and then reconnected.

Windows hangs up (freezes) when returning from the suspended state

Disconnect the USB cable before suspending.

On some computers when Windows resumes from the suspended state, it may hang up (freeze). If this occurs, the USB cable connected to the MMP-2 should be disconnected before suspending.

When you once again wish to use the MMP-2, make sure that the computer has resumed correctly from the suspend state, and then connect the USB cable to the MMP-2.

*If the computer itself has a suspend switch, the USB cable connected to the MMP-2 should be disconnected before you press that switch.

*For a notebook computer, some settings of the computer may cause it to automatically enter suspend mode when the lid (LCD display) is closed, so the USB cable connected to the MMP-2 should be disconnected before the lid is closed.

Does not work with Windows 95

It will not operate on Windows 95.

Trouble Shooting about Computer

43