Roland MMP-2 Set Up and Basic Operations, Getting Ready to Switch on the Power, power, recorder

Set Up and Basic Operations

This chapter introduces the basic functions of the MMP-2 in the following order, which you should follow

in getting started with your new unit.

Getting Ready

to Switch on the Power

Switching on the power

Global

Functions

Adjusting the Input

Switching off the power

Read through this in sequence as you try things out for yourself.

Getting Ready to Switch on the Power

■Making the Connections

MMP-2

power

recorder

microphoneMMP-2

Refer to the figures and the following explanation to connect the equipment you’re using.

For information about digital connections, please read “Settings for Digital Connections” (p. 26).

To prevent problems, including malfunction and damage to speakers, turn the volume down completely and turn off the power for all the devices being connected before making the connections.

Connecting the Power Source	MMP-2
Use the included power cable to connect the unit with a power	rear panel
source.

power cable

12