JVC TH-A32 manual Changing the Scanning Mode, Adjusting the Pictures

Changing the Scanning Mode

You can select the scanning mode if your TV equipped with component video jacks supports the progressive video input.

From the remote control ONLY:

1 Press DVD. DVD

2 Press PROGRESSIVE. PROGRESSIVE

• Each time you press the button, the scanning mode alternates between “INTERLACE” and “P–SCAN.”

INTERLACE:

Select this if your TV does not support the progressive video input (conventional TV).

P(Progressive)–SCAN:

Select this if your TV equipped with component video jacks supports the progressive video input.

When you select the “P-SCAN”, P-SCAN indicator lights up on the display.

Notes:

•If you press PROGRESSIVE while playing back a disc, playing back stops.

•Some progressive TVs and High-Definition TVs are not fully compatible with this system, resulting in the unnatural picture when playing back a DVD in the progressive scanning mode.

In such a case, change the scanning mode to “INTERLACE.” To check the compatibility of your TV, contact your local JVC customer service center.

•All JVC progressive TVs and High-Definition TVs are fully compatible with this system.

Adjusting the Pictures

You can adjust parameters that affect the appearance of picture.

From the remote control ONLY:

1Press CHOICE while playing back a

disc.

Video Enhance menu appears on TV-screen. CHOICE

Video Enhance

Brightness

Edges

Color

Contrast

2Press cursor 5/∞ repeatedly to select a parameter you want to

adjust. ENTER

•Adjust gradually to show preferable

appearance by confirming the picture.

Brightness: Controls the brightness of the screen.

Edges: Controls the sharpness of the screen.

Color: Controls the color of the screen.

Contrast: Controls the contrast of the screen.

3Press cursor 3/2 repeatedly to change the setting.

ENTER

4 Press CHOICE.

Video Enhance menu disappears.

CHOICE

Note:

If you turn off the unit, the video enhance setting return to initial setting.

11