JVC TH-A32 manual Press Audio or STANDBY/ON on the front panel again

Notes:

•When an FM stereo program is received, the STEREO indicator also lights up.

•When you press the button repeatedly, the frequency changes step by step.

5 Activate Surround or DSP Mode

You can enjoy Dolby Pro Logic II mode and DSP modes.

Dolby Pro Logic II—Pro Logic II Movie and Pro Logic II Music

To activate Pro Logic II modes

Press SURROUND. SURROUND

The current Pro Logic II mode appears on the display for a while.

•Each time you press the button, Pro Logic II mode changes as follows:

PL II MUSIC PL II MOVIE

PL II OFF

• When Dolby Pro Logic II mode is activated, the PRO LOGIC

II indicator lights up on the display.

–For in-depth information about Dolby Pro Logic II modes, see “Creating Realistic Sound Fields” on pages 21 to 22.

AUDIO

To turn off the power (into standby)

Press AUDIO (or STANDBY/ON on the front panel) again.

The illumination lamp goes off and the STANDBY lamp lights up.

•A small amount of power is consumed even in standby mode. To turn the power off completely, unplug the AC power cord.

DSP modes—CONCERT, STADIUM, HALL,

THEATER, LIVE HOUSE

To activate DSP modes

Press DSP.

DSP

The current DSP mode appears on the display for a while.

•Each time you press the button, DSP mode changes as follows:

LIVE HOUSE HALL CONCERT

DSP OFF THEATER STADIUM

–For in-depth information about DSP modes, see “Creating Realistic Sound Fields” on pages 21 to 22.

Note:

Before activating the Surround or DSP mode, adjust the speaker setting to bring out the best performance from this system.

For in-depth information about adjusting the speaker setting, see “Setting Menu” on pages 53.

17