JVC TH-A32 manual Adjusting the Sound

	SOUND		STANDBY/ON
SOUND				AUDIO
		TV	VCR		Sound
	CENTER		SUBWOOFER		setting
	1	2	3	4	buttons

REAR-L REAR-R

5 6 7 8

TEST TEST CLEAR SETTINGFM MODE SETTING

9 0

•The test tone comes out of the speakers in the following order:

Left front speaker Center speaker

	Right front speaker
Subwoofer

Left rear speaker Right rear speaker

There is a time limit in doing the following steps. If the setting is canceled before you finish, press SOUND and start from step 4

DVD FM/AM AUX PROGRESSIVE

CONTROL TV/VIDEO SEARCH

TV	VCR
	TVVOL	MUTING REC/MEMORY
		AUDIOVOL
TOP		MENU
MENU
		ENTER

again.

4Adjust the speaker output

levels (–6 dB to +6 dB).

Adjust the center speaker, rear speakers and subwoofer levels comparing to the sound from the front speakers.

CENTER		SUBWOOFER
1	2	3	4
	REAR-L	REAR-R

5 6 7 8

CHOICE ON SCREEN

7

DOWN -TUNING - UP SLOW

AUDIO SUBTITLE ANGLE ZOOM

RETURN DIMMER DSP SURROUND

SLEEP

RM-STHA35J

DVD THEATER SYSTEM

Adjusting the Sound

You can adjust the following settings.

It is recommended that you make adjustments from your actual listening point.

–Output level for the center speaker

–Output level for the rear speakers

–Output level for the subwoofer

1 Load a disc, and Press STOP.

The source changes to DVD and playback stops.

2 Press SOUND.	SOUND
“SOUND” appears on the display and the 10 keys
are activated for sound adjustments.
3 Press TEST to check if you can hear the	TEST
sounds through all the speakers at the	9
equal level.

Test tone menu appears on the TV.

LCR

SW

LS RS

To cancel press Stop

•To adjust the center speaker level, press CENTER +/–.

•To adjust the left rear speaker level, press REAR-L +/–.

•To adjust the right rear speaker level, press REAR-R +/–.

•To adjust the subwoofer level, press SUBWOOFER +/–.

5 Press STOP to stop the test tone.

6 Press SOUND again. SOUND

“SOUND OFF” appears on the display.

Notes:

•If a disc is no loaded, you cannot adjust the settings.

•You can adjust the speaker output levels without outputting the test tone.

•If there is a speaker from which no sounds comes out, check the speaker’s connection (see pages 6 and 7) and setting (see pages 53 and 54).

•If you press SETTING while adjusting sound, speaker settings alternate between 5.1ch (use all sattelite speakers and subwoofer) and 2.1ch (use only front speakers and subwoofer.)

•You can output the test tone in any surround mode, or even when surround mode is not activated.

•When an MP3 disc is loaded, you cannot adjust the subwoofer output level.

23