JVC TH-A32 manual General, Amplifier section, Video section, Tuner section

Page 62
Tuning Range
FM: 87.5 MHz – 108.0 MHz
AM: 530 kHz – 1 710 kHz
Specifications
Center unit (XV-THA35)
Amplifier section
Front/Center/Rear:
45 watts per channel, min. RMS at 6 ohms as 1 kHz, with no more than 10 % total harmonic distortion.
Subwoofer:
100 watts, min. RMS at 10 ohms as 100 Hz,
with no more than 10 % total harmonic distortion.
Audio section
Audio input sensitivity/Impedance (at 1 kHz) Analog input:
AUX (“AUX IN”): 500 mV/47 kΩ Digital input*:
DIGITAL IN (OPTICAL):
–21 dBm to –15 dBm (660 nm ±30 nm) * Corresponding to Linear PCM, Dolby Digital, and DTS Digital
Surround (with sampling frequency — 32 kHz, 44.1 kHz, 48 kHz)
Video section
Color System: NTSC
Horizontal Resolution: 480 lines
Signal-to-Noise Ratio: 68 dB Output Level
VIDEO(Composite): 1.0 V(p-p)/75Ω S-VIDEO(Y): 1.0 V(p-p)/75Ω
(C): 0.286 V(p-p)/75Ω
COMPONENT VIDEO OUT
Y: 1.0 V(p-p)/75Ω PB/PR: 0.7 V(p-p)/75Ω
Tuner section

General

 

Readable Discs:

DVD VIDEO, Video CD,

 

Super Video CD, Audio CD,

 

CD–R/RW (Audio CD, Video CD,

 

Super Video CD, MP3 disc, and

 

JPEG disc), DVD–R (Video format)

Power Requirements:

AC 120 V , 60 Hz

Power Consumption:

180 W (at operation)

 

2 W (in standby mode)

Dimensions (W × H × D): 360 mm × 65 mm × 360 mm

 

(14 3/16 in.× 2 9/16 in.×14 3/16 in.)

Mass:

6.6 kg (14.6 lbs)

Center unit (XV-THA32)

Amplifier section

Front/Center/Rear:

40 watts per channel, min. RMS at 6 ohms as 1 kHz, with no more than 10 % total harmonic distortion.

Subwoofer:

100 watts, min. RMS at 10 ohms as 100 Hz,

with no more than 10 % total harmonic distortion.

60

Audio section

Audio input sensitivity/Impedance (at 1 kHz) Analog input:

AUX (“AUX IN”): 500 mV/47 kΩ Digital input*:

DIGITAL IN (OPTICAL):

–21 dBm to –15 dBm (660 nm ±30 nm)

*Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround (with sampling frequency — 32 kHz,

44.1 kHz, 48 kHz)

Video section

 

 

Color System:

NTSC

 

Horizontal Resolution: 480 lines

 

Signal-to-Noise Ratio: 68 dB

 

Output Level

 

1.0 V(p-p)/75 Ω

VIDEO(Composite):

 

S-VIDEO(Y):

1.0 V(p-p)/75 Ω

 

(C):

0.286 V(p-p)/75 Ω

COMPONENT VIDEO OUT

Y:1.0 V(p-p)/75 Ω PB/PR: 0.7 V(p-p)/75 Ω

Tuner section

 

 

Tuning Range

FM:

87.5 MHz – 108.0 MHz

 

AM:

530 kHz – 1 710 kHz

General

 

 

Readable Discs:

DVD VIDEO, Video CD,

 

Super Video CD, Audio CD,

 

CD–R/RW (Audio CD, Video CD,

 

Super Video CD, MP3 disc, and

 

JPEG disc), DVD–R (Video format)

Power Requirements:

AC 120 V , 60 Hz

Power Consumption:

180 W (at operation)

 

2 W (in standby mode)

Dimensions (W × H × D): 360 mm × 65 mm × 360 mm

 

(14 3/16 in.× 2 9/16 in.×14 3/16 in.)

Mass:

6.6 kg (14.6 lbs)

Subwoofer (SP-WA35)

Speaker:

16 cm (6 5/16 in.)

 

Bass-reflex, Magnetically Shielded

Power Handling Capacity:

100 W

Impedance:

10 Ω (min)

Frequency Range:

25 Hz to 200 Hz

Dimensions (W × H × D):

202 mm × 330 mm × 341 mm

 

(8 in. × 13 in. ×13 7/16 in.)

Mass:

4.8 kg (10.6 lbs)

Satellite Speakers (SP-THA35F)

Speakers:

8 cm (3 3/16 in.)

 

Bass-reflex, Magnetically Shielded

Power Handling Capacity:

45 W

Impedance:

6 Ω (min)

Frequency Range:

90 Hz to 20 kHz

Dimensions (W × H × D):

92 mm × 97.5 mm × 92 mm

 

(3 5/8 in. × 3 7/8 in.× 3 5/8 in.)

Mass:

650 g (1.5 lbs)

Designs & specifications are subject to change without notice.

Page 61 Page 63
Image 62
Page 61 Page 63
Contents TH-A35 TH-A32 For U.S.A Important for Laser ProductsTable of Contents Display Window Center UnitFront Panel RepeatRemote Control Remote ControlPutting Batteries in the Remote Control Before InstallationChecking the Supplied Accessories AM antenna connection Connecting the FM and AM AntennasFM antenna connection Speaker Layout Diagram Getting StartedWhen setting the speakers Connecting the SpeakersConnecting speaker cords to the terminals Connecting Audio/Video Component TV connection Video cord suppliedDVD TV SettingAbout scanning system 5/∞Changing the Scanning Mode Adjusting the PicturesSelect the Source Turn On the PowerBasic DVD Operations Load a DVD6Activate Surround or DSP Mode Stop PlaybackLoad a VCD/CD Adjust the Volume Turn On the PowerBasic VCD/CD Operations DSPYou can enjoy Dolby Pro Logic II mode and DSP modes Activate Surround or DSP ModeFrom the remote control only Press Muting Select the Band Adjust the VolumeBasic Tuner Operations Tune into a StationPress Audio or STANDBY/ON on the front panel again Start playback on the external equipment Adjust the VolumeOther Basic Operations Enjoying Sounds from the External ComponentListening with the Headphones Not available with TH-A32 Adjusting the BrightnessDisplay Turning Off the Power with the TimerTo cancel the Sleep Timer SleepDolby Digital Creating Realistic Sound FieldsDolby Surround Dolby Pro Logic DTS Digital SurroundFor Dolby Digital or DTS Digital Surround Activating the Surround ModeDSP Digital Signal Processor Modes For Pro Logic II modesAdjusting the Sound Discs you can play If appears on the TV screen when pressing a buttonDisc Introduction-DVD/VCD/CD Disc structure-DVD, Video CD VCD/SVCD and Audio CD CDExamplePlayback information on the display Showing the Information on the TV Screen DVD PlaybackShowing the On-screen Menu Selecting the Multi-Angle Views Selecting the SubtitlesSelecting the Audio Languages Moving to a Particular Portion Directly Disc Menu-Driven PlaybackPress cursor 5/∞ to select OK, then Enter Searching for a Particular PointRepeating Playback Press cursor 5/∞ to select RepeatPlaying Back Chapters in Random Order Shuffle Play Programming the Playing Order Chapters Program Play Press 8 repeatedly to advance Picture frame by frame DVD Special Effect PlaybackPress 8 once during playback Press cursor 3/2/5/∞ to move the portion you want to watch Press Slow + or SlowPress Zoom Press cursor 5/∞ repeatedly to select OK Then Enter VCD/CD PlaybackPress cursor 5/∞ repeatedly to select OSD 000116 Track 1/15Press Search during playback or pause. Search Disc Menu-Driven Playback Only for VCDSelecting Playback Channel Desired track or playingSingle To fast-forward the tracks-Variable Speed Forward SearchTo reverse the tracks-Variable Speed Reverse Search AllPlaying Back Tracks in Random Order Shuffle Play Press cursor 5/∞ to select OK, then press EnterPress cursor 3/2/5/∞ to select next program step Press the number button to Enter a track numberProgramming the Playing Order Tracks Program Play You can enjoy slow motion playback while playing a VCD Press Slow +VCD Special Effect Playback You can zoom on the picture while playing back a VCDDisc structure-How are MP3 files recorded and played back? What is MP3?MP3 File Compatibility Press cursor 3/2/5/∞ to select the track, then press Enter Starting PlaybackInsert an MP3 disc Operations Using the On-Screen Display Moving to a Particular Track DirectlyTo move to a particular track directly Repeat steps 2 to 3 to program other tracks you wantPress cursor 3/2/5/∞ to select Crea Prog, then press Loading the Disc What is JPEG?Jpeg Playback Insert a Jpeg discTo stop the slide-show playback completely To stop the slide-show playback temporarilyTo resume the slide-show playback To skip files forwardMoving to a Particular File Directly Programming the Playing Order Files Program PlayPress cursor 3/2/5/∞ to select the file Select a file number you wantTo go to another file Press cursor 3/2/5/∞ to select the start filePress 3 or Enter To start playback of the selected fileTuning in Stations Tuner OperationsUsing Preset Tuning Selecting the FM Reception ModeBasic procedure through the choice menus Setting up the DVD PreferencesUsing the Choice Menus Choice menu appears on the TVLanguages you can select on this menu Language MenuTo move to another choice menu Setting up the DVD Preferences Picture MenuSpeaker setting Setting MenuSetting the delay time Audio MenuPress cursor 3 repeatedly to select Rating Press Enter Setting the Parental Rating LevelChanges to on the menu If you forget your password, enter Rating menu appears on the TVDigits, then Enter Enter a new passwordPress cursor ∞ to select Rating Press cursor 5 to selectVCR Operating JVC’s ComponentsControl Control VCRTry to operate your TV by pressing TV If there are more than one code listed for your brand of TVOperating Other Manufacturers’ TV Manufacturers’ codes for TVGeneral Notes MaintenanceCleaning the unit Handling DiscsSolution TroubleshootingProblem Possible CauseVideo section GeneralAmplifier section Tuner sectionLimited Warranty Consumer VideoAuthorized Service Centers 0203TMMMDWBET
Top Page Image Contents