40003324.qxd 28/06/2006 12:59 Page 10
Do not drag or lift the machine by its door.
Option 2
Into a standpipe
Ensure that the standpipe is not located near an electrical socket.
Install the hose into the standpipe ensuring that the pipe is at least 400mm from the floor.
Insert the outlet pipe approximately 100mm into the standpipe. Ensure that the pipe is not kinked or restricted, as this will prevent the operation of the dryer.
Moving the machine into position
Your machine is heavy so care must be taken when moving it. We recommend that two people move the machine to avoid strain and possible injury.
●Take care not to damage flooring when moving the machine.
●When moving the machine to its final position take care not to kink or damage the hose at the back of the machine.
Adjusting the feet
Once the machine is in place the feet should be adjusted to ensure that the machine is level. If the machine is not level it may become noisy or move.
Adjust the feet on the front corners of the machine until the machine is firm and level.
10