840164302 ENv01.qxd:840144500 Ev02.qxd 1/11/12 10:47 AM Page 4
Parts and Features
| Spray and Blast | |
| Buttons | |
Steam |
| |
ON/OFF Control | Swivel | |
| ||
| Power | |
Water Fill | Cord | |
Heel | ||
Cover | ||
Rest | ||
| ||
| Auto Shutoff | |
| Reset Light |
Sensor Control
This iron is equipped with a position/motion sensor. This means that if the iron is left motionless it will turn off automatically and cool to room temperature.
To restart iron, simply move the iron and allow it to reheat on the heel rest position.
The iron will reheat to the previously selected setting.
POSITION SENSING
The iron will turn off automatically when left in the following positions. The auto off time varies based on the iron’s position.
|
| (GREEN) | |
| Temperature | and Power | |
| ON Light | ||
| Control Dial | ||
Soleplate | (RED) | ||
| |||
Button |
|
|
Spray
Steam
IRON POSITION
Resting on soleplate
Resting on either side
Resting on heel
MOTIONLESS TIME
30 seconds
30 seconds or 15 minutes depending on exact orientation
15 minutes
Steam ON/OFF
Control
Auto Shutoff Reset Light
After 30 seconds of no movement in the horizontal position, the iron will automatically shut off and the green light will blink. Move iron upright to vertical position to turn back on.
4 | 5 |