840101400 ENv02.qxd 5/10/02 1:28 PM Page 4
To Dry Iron
Features
1.Plug iron into outlet.
2. Set the Adjustable Steam Switch to O (the Dry Iron position).
3. | Turn Temperature Control Dial to |
| desired temperature. Allow two |
| minutes for iron to reach desired |
| temperature. |
4. | To turn iron Off, turn Temperature |
| Control Dial to Off and unplug iron. |
Auto Shutoff Reset Button/Light
The light comes on when the iron is first plugged in. After 15 minutes, the iron will shut off and the light will go out. Push the Reset Button to turn the iron back on.
Reset
Button
Light 
To Steam Iron
1. | Unplug iron. Using a cup, slowly pour 5 ounces of tap |
| water into water tank opening. Do not fill iron directly from |
| the faucet. |
2. | Plug iron into outlet. |
3. | Turn Temperature Control Dial to desired fabric setting in |
Power On Light
This light comes on when the iron is plugged in and remains on until the iron is unplugged. The light stays on even if Temperature Control Dial is turned to Off.
Power
Light
| steam range. Then set Adjustable Steam Switch to the |
| recommended steam level. |
4. | Allow two minutes for the iron to reach desired temperature. |
5. | To turn iron off, set Adjustable Steam Switch to O (Dry |
| Iron). Turn the Temperature Control Dial to Off. Unplug iron. |
6. | Empty water from the iron following directions in “Caring |
| for Your Iron.” |
Spray and Blast of Steam Buttons
Push Blast Button for an extra blast of steam. Push Spray Button to release a fine spray of water for difficult wrinkles in cotton or linen.
Blast Spray
4 | 5 |