Electrolux EDI 96150 W user manual What to do if…, Remedying small malfunctions

34 electrolux what to do if…

What to do if…

Remedying small malfunctions

If, during operation, the error code (E plus number or letter) appears on the

multi-display: Switch the appliance off and on again. Reset programme. Press the START/PAUSE button.

If the error appears again, please con- tact the Customer Care Department, stating the error code.

Problem		Possible cause	Remedy
	Mains plug is not plugged in or		Plug in at mains socket. Check
	fuse is not working correctly.		fuse in fuse box (domestic installa-
			tion).
Washing machine does
not work.	Door is open.		Close door.
	Press the START/PAUSE but-		Press the START/PAUSE button.
	ton.
	Programme selector in O OFF		Turn the programme selector to
Drum light is not working.	position.		any programme.
	Defective light bulb.		Replace light bulb (see next sec-
			tion).
Iron Aid programme does	Water tank is empty.		Fill water tank.
not start.
	Wrong programme selected
	(e.g.	SYNTHETICS instead	Note the composition of the fabric.
	of	COTTON).
	Too low a LOAD steam level		Set a higher LOAD steam level.
	set.
	Too many garments in machine,		Load the machine with fewer gar-
	or garments that are too differ-		ments, or only similar ones.
	ent.
After an Iron Aid pro-
			Remove clothes quickly one at a
gramme, garments are	Clothes are not removed until
			time from the machine as soon as
not sufficiently smooth.
	the anti-crease phase is fin-
			possible after the start of the anti-
	ished.
			crease phase.
	Garments not hung on clothes		Hang garments on clothes hang-
	hangers and/or not tugged into		ers, do up buttons and tug gar-
	shape.		ments into shape.
	Multi-layered garments tend to		Reshape multi-layered garments
	lose their shape.		by ironing after they come out of
			the machine.
After an Iron Aid pro-	The Iron Aid programme has
gramme, there are no			Iron creases in again after the Iron
	the effect of smoothing gar-
creases left in the gar-			Aid programme.
	ments.
ments.