Electrolux EDI 96150 W user manual Electrical connection

Page 39

electrical connection electrolux 39

Electrical connection

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent per- son.

WARNING – THIS APPLIANCE MUST BE EARTHED.

The manufacturer declines any lia- bility should these safety measures not be observed.

Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance rating plate.

Important:

The plug must be accessible after the appliance has been installed.

The appliance is supplied with a 13 amp plug fitted. In the event of having to change the fuse in the plug supplied, a 13 amp ASTA approved (BS 1363) fuse must be used.

Should the plug need to be replaced for any reason, proceed as described be- low.

The wires in the mains lead are coloured in accordance with the following code:

Green and Yellow:

Earth

Blue:

Neutral

Brown:

Live

• The wire coloured green and yellow must be connected to the terminal marked with the letter “E“ or by the earth symbol E or coloured green and yellow.

• The wire coloured blue must be con- nected to the terminal “N“ or coloured black.

Image 39 Contents
Iron Aid EDI 96150 W We were thinking of you when we made this product Welcome to the world of Electrolux Contents Safety Electrolux safety Disposal Pre-draining Drying cycle Environmental tipsAppliance description Control panel What is shown in the displayFunction overview Iron AidTM Steam System Iron Aid Smoothes Programmes Washed Worn Garments ClothingOdour Removal Worn Clothing Prior to using for the first time Sorting and preparing laun- drySorting laundry general Opening loading door / loading laundry Switching appliance on / switch- ing light onStarting up for the first time Preparing laundry generalFill water tank Iron AidTM Steam-SystemIron aidTM steam-system electrolux Overview of Iron AidTM programmes Additional FunctionsApplication/properties Dry Wet Volume Min LoadingProgramme Select steam level Load Selecting the programmeBuzzer Selecting additional functionsElectrolux overview of iron aidtm programmes Changing a programme Starting an Iron AidTM pro- grammeIron Aid programme complete / removing laundry Care sym- bols Drying Overview of drying programmesDryness Delicate Time Removing laundry or loading laundry when necessary Starting a drying programmeDrying cycle complete / removing laundry Cleaning lint filters Cleaning and maintenanceClean the door seal Emptying the condensed water container Cleaning and maintenance electrolux Cleaning heat exchanger Cleaning the drum Clean control panel and housingChanging the light bulb for interi- or lighting Problem Possible cause Remedy What to do if…Remedying small malfunctions Next time you dry see section Technical data Loading Energy Programme Volume ConsumptionConsumption values Installation safety instruc- tions Removing transport safety packaging Electrical connection Electrolux electrical connection Levelling the appliance Changing door stop Special accessoriesExclusions This guarantee does not cover Guarantee/Customer Serv- iceEuropean Guarantee Quinta da Fonte Edificio Gonçalves Zarco Q Service and Spare Parts Electrolux service and spare parts Page 125 986