Electrolux EDI 96150 W user manual Emptying the condensed water container

Page 30

30 electrolux cleaning and maintenance

Emptying the condensed water container

Empty condensed water container after every drying cycle.

If the condensate tank is full, an active programme will break off automatically and the TANK display will light up. In or- der to continue the programme, the condensed water container must first be emptied.

Warning! The condensate is not suitable for drinking or for preparing foodstuffs.

1.Pull drawer containing condensed water container

all the way out (1) and pull up the condensed water container’s drain- age pipe as far as it will go (2).

2.Pour out the condensate into a basin or similar container.

3.Push drainage pipe in and refit con- densed water container.

If the programme has been interrupted as a result of the condensed water con- tainer being full:

Press the START/PAUSE button to con- tinue the drying cycle.

The condensed water container has a volume of approx. 4 litres. This is sufficient for around 6kg of laundry which has previously been spun at 1000 revolutions/minute.

Image 30
Contents Iron Aid EDI 96150 W We were thinking of you when we made this product Welcome to the world of Electrolux Contents Safety Electrolux safety Disposal Environmental tips Pre-draining Drying cycleAppliance description What is shown in the display Control panelFunction overview Iron AidTM Steam System Iron Aid Smoothes Programmes Washed Worn Garments ClothingOdour Removal Worn Clothing Prior to using for the first time Sorting and preparing laun- drySorting laundry general Preparing laundry general Switching appliance on / switch- ing light onStarting up for the first time Opening loading door / loading laundryIron AidTM Steam-System Fill water tankIron aidTM steam-system electrolux Overview of Iron AidTM programmes Additional FunctionsApplication/properties Dry Wet Volume Min LoadingProgramme Selecting the programme Select steam level LoadSelecting additional functions BuzzerElectrolux overview of iron aidtm programmes Starting an Iron AidTM pro- gramme Changing a programmeIron Aid programme complete / removing laundry Drying Overview of drying programmes Care sym- bolsDryness Delicate Time Removing laundry or loading laundry when necessary Starting a drying programmeDrying cycle complete / removing laundry Cleaning and maintenance Cleaning lint filtersClean the door seal Emptying the condensed water container Cleaning and maintenance electrolux Cleaning heat exchanger Cleaning the drum Clean control panel and housingChanging the light bulb for interi- or lighting Problem Possible cause Remedy What to do if…Remedying small malfunctions Next time you dry see section Technical data Loading Energy Programme Volume ConsumptionConsumption values Installation safety instruc- tions Removing transport safety packaging Electrical connection Electrolux electrical connection Special accessories Levelling the appliance Changing door stopGuarantee/Customer Serv- ice Exclusions This guarantee does not coverEuropean Guarantee Quinta da Fonte Edificio Gonçalves Zarco Q Service and Spare Parts Electrolux service and spare parts Page 125 986