Starting a drying programme
Press the START/PAUSE button. The programme is started.
The programme progress display shows drying progress. The symbols for
DRYING and 
COOLING appear in the display one after the other. The number of droplets in the dryness indi- cator gradually goes down as the drying process progresses.
Changing a programme
To change a programme which has been selected by mistake once the pro- gramme has started, first turn the pro- gramme selector to OFF and then reset the programme.
The programme can no longer be changed directly once the pro- gramme has started. If you never- theless attempt to change the programme with the programme knob or an additional function but- ton (except the BUZZER button), the START/PAUSE button and Err will flash in the
Removing laundry or loading laundry when necessary
1.Open loading door
Warning! Laundry and drum can bec ome hot. Risk of burns!
2.Load or remove laundry items.
starting a drying programme electrolux 27
3.Close the door securely. Lock must audibly lock.
4.Press the START/PAUSE button to continue the drying cycle.
Drying cycle complete / removing laundry
Once the drying programme has fin- ished, 
CREASE GUARD lights up in the display. If the 
BUZZER is activat- ed, an audible signal sounds at regular intervals.
The drying cycle is automatically followed by a
The drum rotates at intervals during this phase. This keeps the laundry loose and free of creases. It can be removed at any time during the
1.Open door.
2.Before removing the laundry, remove fluff from the
3.Remove laundry.
4.Turn the programme knob to O OFF.
5.Important! After each drying cycle
–Clean the
–Drain the condensed water contain- er
(See section “Cleaning and mainte- nance”.)
6.Close door.