GE Gas Turbine manual MS6001B/MS7001EA/MS9001E

Page 13

MS6001B/MS7001EA/MS9001E

Available for Oil & Gas Applications

APPLICATIONS

The 7EA is fuel-flexible, and can operate on natural gas, liquefied natural gas (LNG), distillate and treated residual oil in a variety of applications including:

-mechanical drive for large compressor trains

-simple cycle and combined cycle

-base load and peaking power generation

-industrial and cogeneration

FEATURES

-17-stage compressor with stacked disk design

-reverse flow combustion system with an individual nozzle single combustion chamber

-3-stage turbine with air-cooled, first and second-stage nozzles and buckets

-three-bearing rotor supports

MS6001B

The MS6001 is a single-shaft, heavy-duty gas turbine. The high efficiency axial compressor has 17 stages. The combustor has ten combustion chambers with individual fuel nozzles. The machine has a three-stage impulse turbine with air-cooled buckets and stationary nozzles on the first two stages to achieve higher firing temperatures and consequently higher efficiency without compromising hot section component life.

MS6001B

Gas Turbine

MS7001EA

The GE MS7001EA is a highly reliable, mid-sized packaged power plant developed specifically for 60 Hz applications. With design emphasis placed on energy efficiency, availability, performance and maintainability, the 7EA is a proven technology machine with more than 775 units of its class installed or on order worldwide as of December 1999. The simple, medium-sized design of the 7EA lends itself to flexibility in plant layout and easy, low cost addition of power augmentation when phased capacity expansion is needed. A predecessor of the 7FA, the 7EA is ideal for plants that require high efficiency along with shaft speed for direct coupling to the generator.

MS7001EA

Gas Turbine

MS9001E

The MS9001 is a single-shaft, heavy-duty gas turbine developed for generator drive service in the 50 Hz market. Its efficiency is approx 33% in simple cycle mode and over 50% when operated as a combined cycle. The MS9001 is designed to burn a variety of liquid and gaseous fuels.

MS9001E

Gas Turbine

13GE Energy Gas Turbines

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Gas Turbines Contents GE Energy Gas Turbines Compressor GE5 Gas TurbinesTurbine Combustor Package Some KEY Points Maintenance PhilosophyGenerator Drive Single Shaft Version GE10 Gas TurbinesMechanical Drive Two Shaft Version AuxiliariesMS5001 Gas Turbines MS5002C-DGas Turbines MS5002E Gas Turbines MS6001B/MS7001EA/MS9001E PGT16 Aeroderivative Gas Turbines General SpecificationsGAS Generator PGT25 Aeroderivative Gas TurbinesPGT25+ Aeroderivative Gas Turbines LM6000 Aeroderivative Gas Turbines Axial Compressor Main ComponentsBuckets and Wheels First Stage NozzleLarge Operability Window Gas Turbine OperabilityCPC Logic Ambient Temperature 22 CGas, Water Injection & Gas Storage Units LNG Exploration and Production, Floating Production UnitsPipeline Standard Units/Packages PipelineDownstream Plants Refinery and PetrochemicalsTest Facilities Service Training Training SolutionsCenter of Excellence for Training Covered EquipmentISO Rated Heat Rate Effic Mechanical Drive ISO conditions natural gas shaft output Generator Drive Mechanical Drive GE imagination at work
Top Page Image Contents