Steaming in a Vertical Position, Water Spraying

Steaming in a Vertical Position

•Burst-of-Steam (6) can also be applied when holding the iron in a vertical position. (Fig. 7) this is useful when removing creases from hanging clothes, curtains, etc… The Burst-of- Steam (6) feature can only be used while ironing at high temperatures at an interval of 5 seconds.

•The iron is also suitable for continuous vertical steam (and horizontal) but only on maximum temperature.

Fig. 7

Water Spraying

•You can spray at any temperature by pushing on the spray button (4). (Fig 8)

•An electrical pump in the ironing stand (8) supplies the small reservoir (13) with spray water.

•Ensure that there is enough water in the water tank (8A).

•When the internal reservoir (13) is empty, after intensive spraying, pull the steam trigger (3) for about 1 minute to refill it. Refilling is complete when you see/hear steam coming out from the steam vents on the iron soleplate.

Note: Filling and refilling of the internal reservoir must be executed at a temperature setting between •• and MAX. It’s not possible to fill the reservoir at a temperature setting below ••. (Fig. 9)

Fig. 8

Fig. 9