Euro-Pro EP7005 warranty Installing the Rubber Mat 10 onto the Iron Stand

Page 7

Installing the Rubber Mat (10) onto the Iron Stand (8)

Please note that during transportation, the rubber mat (10) may come off its place.

•The iron stand (8) has 5 holes on the circumference of its top.

•The rubber mat (10) has 5 pins in the corresponding locations.

•Place the rubber mat (10) on top of the iron stand (8) and push each individual pin into its hole. (Fig. 1)

IMPORTANT: Never place the hot iron on the plastic iron stand without the rubber mat on top of the iron stand.

Fig. 1

4

Image 7

Contents Steam Station For Household USE only Special Instructions Steam Station Choosing the Ironing Temperature How the Water is Pumped to the Iron Before First UseInstalling the Rubber Mat 10 onto the Iron Stand Word on Water Filling the Water TankIroning Without Steam Ironing With Steam Continuous Steam Function Anti-Drip FunctionContinuous Vertical Steaming Burst-Of-Steam Function Water Spraying Steaming in a Vertical PositionAttaching Iron to the Ironing Board How to Replace the Anti-Calc Cassette CleaningStorage Problem Potential RE Ason & Solutions Iron TroubleshootingONE 1 Year Limited Warranty