JVC GVT0141-003A manual Speaker layout, Connecting a TV

Page 12

Connections

Do not connect the power cord until all other connections have been made.

Speaker layout

 

Center speaker

Front left

 

 

Front right

 

 

speaker

 

 

speaker

Subwoofer

Surround left

Surround right

speaker

speaker

NOTE

Although the satellite speakers and the subwoofer are magnetically shielded, the TV screen may appear mottled. In this case, keep enough distance between the speakers and the TV.

The speakers are magnetically shielded to avoid color distortions on TVs. However, if not installed properly, it may cause color distortions. So, pay attention to the following when installing the speakers.

-When placing the speakers near a TV set, turn off the TV’s main power switch or unplug it before installing the speakers. Then wait at least 30 minutes before turning on the TV’s main

power switch again.

Some TVs may still be affected even though you have followed the above. If this happens, move the speakers away from the TV.

Place the satellite speakers on a flat and level surface.

Be sure to place the subwoofer to the TV’s right. If you place the subwoofer to the TV’s left, keep sufficient distance between them to prevent the TV screen from appearing mottled.

Connecting a TV

Distortion of picture may occur when connecting the TV via a VCR, or to a TV with a built-in VCR.

You need to set “MONITOR TYPE” in the PICTURE menu correctly according to the aspect ratio of your TV. (See page 32.)

7To connect a TV equipped with the component video input jacks

Center unit

TV

To component video input

Component video cord (not supplied)

NOTE

If your TV supports progressive video input, you can enjoy a high quality picture by setting the progressive scan mode to active. (See page 15.)

If the component video input jacks of your TV are of the BNC type, use a plug adapter (not supplied) to convert the pin plugs to BNC plugs.

The component video signals can be output only when you select “DVD” as the source to play. (See page 14.)

7To connect a TV equipped with the S-VIDEO and/or the composite video input jacks

Center unit

Composite video cord

 

 

 

 

 

 

 

 

TV

(supplied)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

S-VIDEO cord (not supplied)

NOTE

Select the appropriate scan mode according to your TV. (See page 15.)

9

Image 12
Contents TH-S1 Consists of XV-THS1, SP-WS1, SP-THS1F, and SP-THS1SImportant for Laser Products Front view Side viewTable of contents Supplied accessories Safety precautionsIntroduction Important cautionsAbout discs Playable disc typesDiscs you can play Region code of DVD VideoAbout discs Setting the Voltage Selector except for Hong Kong Index of parts and controlsFront panel center unit Rear panel center unitRemote control Operating the system from the remote controlIndex of parts and controls Connecting the FM and AM antennas ConnectionsAM loop antenna FM antennaTwist and pull the insulation coat off and remove Subwoofer Surround speakersConnecting a TV Speaker layoutConnecting to an analog component Connecting to a digital componentConnecting the power cord Operating external components with the remote control Operating the TVRelease TV To set the manufacturer’s codeOperating external components with the remote control Slide the remote control mode selector to VCROperating the VCR Release VCRBasic operations Turning the system on/offPress Audio PressAdjusting the volume Volume Listening with headphones not suppliedAdjusting the brightness of the indications Dimmer Selecting the source to playSleep Timer Sleep Adjusting the treble sound TrebleChanging the scan mode Playback Basic playbackPress OPEN/CLOSE Place a discExample When a CD is played back Playback information on the display windowMP3 disc Pressing FL DispOne Touch Replay Fast-forward/fast-reverse searchSkip to the beginning of a desired selection Locating a desired title/ group using number buttons Press TITLE/GROUPUsing the surround mode Advanced operationsAuto Surround Auto Surr Dolby SurroundUsing the on-screen bar Selecting the surround modePress SURR. repeatedly to select the desired mode Showing the on-screen barContents of the on-screen bar during playback Changing the time informationPress on Screen twice Locating a desired scene using a VCD/ Svcd menu with PBC Locating a desired chapter using the on- screen barPlaying from a specified position on a disc Locating a desired scene from the DVD menuUsing the file control display Locating a desired position by specifying the timePress Enter Press on Screen Beginning of the discResume Playback Selecting a view anglePress Cursor 3/2/Y/5 to select the desired group/track/file Press 3 play button or EnterSelecting the subtitle Selecting the audioPress Subtitle Press Cursor Y/5to select the desired subtitleChanging the VFP setting Special picture playbackFrame-by-frame playback Playing back in slow-motionPress Cursor Y/5 to change the setting Press Enter Repeat steps 3 to 6 to adjust other parameters Press VFPProgram Playback Random PlaybackRepeat Playback Repeating the current selectionRepeating a desired part A-B Repeat Press RepeatSound and other settings Press SettingPress Cursor 3/2 to make an adjustment or selection Tray lockSetting DVD preferences Using the setup menusMenu description Speaker setting menu Picture menu PictureAudio menu Audio Other setting menu Others This case, set the distance of each speaker as followsYou can activate or deactivate Resume Playback function Country/Area codes list for Parental Lock Manual tuning Setting the AM tuner interval spacingTuner operations Preset tuning Selecting the FM reception modeAV Compu Link remote control system Connection and setupOperation Refer also to the instruction supplied with your TV or VCRMaintenance TroubleshootingCleaning the system ReferencesSpecifications Center unit XV-THS1Front / Center speakers SP-THS1F Surround speakers SP-THS1SEN, CS Consists of XV-THS1, SP-WS1, SP-THS1F, and SP-THS1S Page Wall or obstructions Table of contents Introduction About discs About discs Setting the Voltage Selector Remote control Connections Connections Speaker layout Connecting to an analog component Operating external components with the remote control Operating the VCR Basic operations Selecting the source to play Sleep Timer Sleep Playback D T One Touch Replay Locating a desired title/ group using number buttons Advanced operations Using the on-screen bar Changing the time information Playing from a specified position on a disc Using the file control display Resume Playback Selecting the subtitle Special picture playback Program Playback Repeat Playback Tray lock Setting DVD preferences SPK. Setting Other setting menu Others Country/Area codes list for Parental Lock Tuner operations Preset tuning AV Compu Link remote control system References Specifications EN, AR, PE