JVC GVT0141-003A manual Using the on-screen bar

Page 67

Advanced operations

See page 20 for button locations.

7All Channel Stereo (DSP)

All Channel Stereo (ALL CH ST.) mode can reproduce a larger stereo sound field using all the connected (and activated) speakers. All Channel Stereo can be used while reproducing 2 channel stereo source.

Normal stereo sound

All Channel Stereo

 

 

 

 

 

 

 

 

 

 

 

 

7Indicators on the display window

Digital signal format indicators

LPCM:

Lights when Linear PCM signal comes in.

GD:

Lights when Dolby Digital signals come in.

C:

Lights when DTS Digital (Surround) signals

 

come in.

No indication:

No digital signal indicator lights when analog

 

signals come in.

Dolby Surround/DSP mode indicators

GPLII: Lights when Dolby Pro Logic II mode is activated.

DSP: Lights when All Channel Stereo mode is activated.

Source signal indicators, etc. Light to indicate the incoming signals. a: Lights when the front left channel signal

comes in.

b: Lights when the center channel signal comes in.

c: Lights when the front right channel signal comes in.

d: Lights when the LFE channel signal comes in.

g: Lights when the surround left channel signal comes in.

i: Lights when the surround right channel signal comes in.

h: Lights when the monaural surround channel signal or 2 channel Dolby Surround signal comes in.

SW : Always lights without the headphone mode.

The channel with “ ” shows that the corresponding speakers are reproducing the channels’ sound.

If the channels’ sound decoded into 5.1 channel is reproduced, only “ ” lights.

Selecting the surround mode

The system is set up to automatically select the optimal surround mode for input signal from digital multichannel software.

When playing back 2 channel source, you can select the desired surround mode manually.

NOTE

• This function also takes effect for the sources other than DVD.

7When playing back digital multichannel software

(except during SURR OFF mode)

The appropriate multichannel surround mode (Dolby Digital, DTS Digital Surround or Linear PCM) is automatically selected.

7When playing back 2 channel source

You can select either mode of Dolby Pro Logic II (PL II MOVIE/ PL II MUSIC) or the DSP (ALL CH ST.) mode.

Press SURR. repeatedly to select the desired mode.

The surround mode is turned on and the current surround mode appears on the display window.

Each time you press the button, the surround mode changes.

For details on each mode, see page 20.

To turn off the surround mode

Press SURR. repeatedly until SURR OFF appears on the display window.

Storing adjustments — auto memory

When you turn the power off, the system memorizes the current surround mode. The memorized mode is automatically recalled when you turn the power on.

NOTE

•When FM or AM is selected as the source, you cannot select any surround mode.

Using the on-screen bar

You can check disc information and you can use some functions using the on-screen bar.

Showing the on-screen bar

7Whenever a disc is loaded

Press ON SCREEN.

Each time you press the button, the on-screen bar changes as follows on the TV screen.

Example:

During DVD VIDEO playback

OFF

(The on-screen bar disappears)

(back to the beginning)

• The currently selected item shows green.

21

Page 66 Page 68
Image 67
Page 66 Page 68
Contents Consists of XV-THS1, SP-WS1, SP-THS1F, and SP-THS1S TH-S1Important for Laser Products Side view Front viewTable of contents Important cautions Supplied accessoriesSafety precautions IntroductionRegion code of DVD Video About discsPlayable disc types Discs you can playAbout discs Rear panel center unit Setting the Voltage Selector except for Hong KongIndex of parts and controls Front panel center unitOperating the system from the remote control Remote controlIndex of parts and controls FM antenna Connecting the FM and AM antennasConnections AM loop antennaSubwoofer Surround speakers Twist and pull the insulation coat off and removeSpeaker layout Connecting a TVConnecting to a digital component Connecting to an analog componentConnecting the power cord To set the manufacturer’s code Operating external components with the remote controlOperating the TV Release TVRelease VCR Operating external components with the remote controlSlide the remote control mode selector to VCR Operating the VCRPress Basic operationsTurning the system on/off Press AudioSelecting the source to play Adjusting the volume VolumeListening with headphones not supplied Adjusting the brightness of the indications DimmerAdjusting the treble sound Treble Sleep Timer SleepChanging the scan mode Place a disc PlaybackBasic playback Press OPEN/CLOSEPressing FL Disp Example When a CD is played backPlayback information on the display window MP3 discFast-forward/fast-reverse search One Touch ReplaySkip to the beginning of a desired selection Press TITLE/GROUP Locating a desired title/ group using number buttonsDolby Surround Using the surround modeAdvanced operations Auto Surround Auto SurrShowing the on-screen bar Using the on-screen barSelecting the surround mode Press SURR. repeatedly to select the desired modeChanging the time information Contents of the on-screen bar during playbackPress on Screen twice Locating a desired scene from the DVD menu Locating a desired scene using a VCD/ Svcd menu with PBCLocating a desired chapter using the on- screen bar Playing from a specified position on a discBeginning of the disc Using the file control displayLocating a desired position by specifying the time Press Enter Press on ScreenPress 3 play button or Enter Resume PlaybackSelecting a view angle Press Cursor 3/2/Y/5 to select the desired group/track/filePress Cursor Y/5to select the desired subtitle Selecting the subtitleSelecting the audio Press SubtitlePlaying back in slow-motion Changing the VFP settingSpecial picture playback Frame-by-frame playbackRandom Playback Press Cursor Y/5 to change the setting Press EnterRepeat steps 3 to 6 to adjust other parameters Press VFP Program PlaybackPress Repeat Repeat PlaybackRepeating the current selection Repeating a desired part A-B RepeatTray lock Sound and other settingsPress Setting Press Cursor 3/2 to make an adjustment or selectionUsing the setup menus Setting DVD preferencesMenu description Picture menu Picture Speaker setting menuAudio menu Audio This case, set the distance of each speaker as follows Other setting menu OthersYou can activate or deactivate Resume Playback function Country/Area codes list for Parental Lock Setting the AM tuner interval spacing Manual tuningTuner operations Selecting the FM reception mode Preset tuningRefer also to the instruction supplied with your TV or VCR AV Compu Link remote control systemConnection and setup OperationReferences MaintenanceTroubleshooting Cleaning the systemSurround speakers SP-THS1S SpecificationsCenter unit XV-THS1 Front / Center speakers SP-THS1FEN, CS Consists of XV-THS1, SP-WS1, SP-THS1F, and SP-THS1S Page Wall or obstructions Table of contents Introduction About discs About discs Setting the Voltage Selector Remote control Connections Connections Speaker layout Connecting to an analog component Operating external components with the remote control Operating the VCR Basic operations Selecting the source to play Sleep Timer Sleep Playback D T One Touch Replay Locating a desired title/ group using number buttons Advanced operations Using the on-screen bar Changing the time information Playing from a specified position on a disc Using the file control display Resume Playback Selecting the subtitle Special picture playback Program Playback Repeat Playback Tray lock Setting DVD preferences SPK. Setting Other setting menu Others Country/Area codes list for Parental Lock Tuner operations Preset tuning AV Compu Link remote control system References Specifications EN, AR, PE
Top Page Image Contents