Advanced operations
See page 20 for button locations.
7For MP3:
During playback or while stopped For JPEG:
While stopped
1 Press Cursor 3/2/Y/5 to select the desired group/track/file.
•For MP3, playback starts from the selected track.
•For JPEG, proceed to perform the following operation.
2 Press 3 (play button) or ENTER.
•Track
•When you press ENTER for JPEG, only the selected file is played back.
To skip the file during playback
Press x/4or Cursor 5/Y.
NOTE
•You can also check playback information on the display window. (See page 17.)
•Some group, track and file names may not be displayed correctly depending on recording conditions.
•The order of groups, tracks and files may be displayed differently from the order displayed on your personal computer.
Resume Playback
When Resume Playback is set to “ON”
(see page 33) and you stop playback by the following operations, the position where
playback has been stopped is stored. (“RESUME” appears on the display window.)
•Turning off the power (see page 13)
•Pressing 7once
•Changing the source (see page 14)
To start playback from the stored position
(“RESUME” disappears.)
•Press 3(play button) on the remote control or the center unit.
•Select DVD as the source again if you changed the source.
To clear the stored position
Press 7again or open the disc tray.
Selecting a view angle
7During playback of a disc containing
When using the ANGLE button:
1 Press ANGLE.
Example:
The first view angle is selected out of 3 view angles recorded.
2 Press ANGLE repeatedly or Cursor Y/
5to select the desired view angle.
When using the
1 Press ON SCREEN twice.
The
2 Press Cursor 3/2 to highlight 
. 3 Press ENTER.
4 Press Cursor Y/5to select the desired view angle.
5 Press ENTER.
6 Press ON SCREEN.
The
25