Haan GS-60 user manual Using Your Steam Station, Before using your Steam Station

Page 10

Using Your Steam Station™

!CAUTION

The GS-60 emits steam at 212°F to sanitize the area of use. This means that the steam head and other attachments get very hot during use. Care should be taken when using this appliance and DO NOT touch them during use except in the approved manner as outlined in this manual.

!CAUTION

Use a grounded receptacle. Use only a heavy duty extension cord rated for 15 amps minimum – DO NOT use an ordinary extension cord. To provide continued protection against the risk of electric shock, connect to a properly grounded outlet only.

IMPORTANT

This product is NOT for space heating purposes.

Always be sure that your garment steamer is UNPLUGGED from the wall receptacle prior to filling the water tank.

Operating Instructions:

Before using your Steam Station™:

1)Be sure to read ALL instructions and warnings before using your HAAN® Steam Station™ Garment Steamer and Home Sanitizer.

2)Your garment steamer is designed to steam fabrics throughout your home. Before steaming an entire garment, be sure to test steam a small portion of the fabric in an interior portion of the garment near a hem or seam.

NOTE: After each use, completely empty any remaining water from the internal tank. Cool the Garment Steamer for at least 30 minutes after use. Water can be drained from the tank by opening the Excess Water Removal Valve and emptying the excess water into the sink.

3)Remove all parts from package and assemble the unit as described on page 6.

Using the STEAM STATION™ with the Garment Valet:

4)Place the Steam Station in the Deluxe Garment Valet on a firm surface. Adjust the Stabilizer Wings of the base to provide balance. DO NOT plug in the unit yet.

5)Fill the included cup with water and use this to add water to the tank. (Optimum fill capacity of unit is 2 cups/500cc.) There is a RED fill indicator within water tank fill recess. This indicator will rise as you fill the tank with water. When the RED indicator nub is level with the interior ring within the fill recess, the tank is full. Be careful not to overflow the container. (Fig 1)

6)Plug the power cord into your electric receptacle.

7)Hang the steam head on the top of the Garment Valet in the convenient prongs atop the hanger. (Fig 2)

Fig 1

Fig 2

pg 8

877 - HAAN DIRECT / 877 - 422 - 6347

www. H A A N USA . com

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Garment Steamer & Home Sanitizer Page T r o d u c t i o n W. H a a N USA . com Haan Direct / 877 422Important Safety Information W. H a a N USA . com Haan Direct / 877 422 GS-60 Make sure to check for the following accessories Flush with the base Threaded Base Ring Assembling Your Haan Steam Station & Deluxe Garment ValetBase by pulling the small black clasp back Adjusting Your Deluxe Garment Valet Open ClosedBefore using your Steam Station Using Your Steam StationUsing the Steam Station with the Garment Valet Haan Helpful Hints PlugUsing the Portable Steam Station Tips on Using the Steam Station Accessories Crease Tool and extra ClipOperating Instructions Remove Odors Helpful HintsSanitize Baby’s Room Care for Your Fine Table LinensMineral Deposits Care & MaintenanceNever use additives such as salt, perfume and dyes Valet base Possible Solution Troubleshooting and QuestionsProblem Steam Station does not operate Possible Cause Problem Steam Station does not emit steam Possible CauseTroubleshooting and Questions Question Does the Haan Steam Station kill germs? ? Question How long does a full tank of water last?Question How do I know when the tank is empty? Specifications Product Specifications Model GS-60Warranty One-Year Limited WarrantyDays Warranty NoticeFailure Within the manualPlace Stamp Here Colonial Village Lane Lancaster, PA
Top Page Image Contents