JVC GVT0155-001A manual Sleep Timer Sleep, Adjusting the sound, Changing the video signal

Basic operations

See page 13 for button locations.

Sleep Timer [SLEEP]

The system turns off automatically when the specified period of time has passed.

Press SLEEP, with SHIFT pressed.

Each time you repeat the procedure, the shut-off time changes. Example:

minutes

S L E E P 6 0

To check the remaining time

Press SLEEP, with SHIFT pressed once.

To change the remaining time

Press SLEEP repeatedly, with SHIFT pressed.

To cancel

Press SLEEP repeatedly, with SHIFT pressed until “SLEEP - -” appears.

• Turning off the power also cancels the Sleep Timer.

Adjusting the output level of the front/center/ surround speakers and subwoofer

1 Press SPK-LEVEL to show the target speaker indication on the display window.

Each time you press the button, the indication of the speakers changes as follows:

FRONTL Z FRONTR Z CENTER Z

SURR(surround) L Z SURR(surround) R Z

SUBWFR Z (back to the beginning)

2 Press LEVEL +/– to adjust the output level from -6 to 6.

NOTE

•You can also make adjustments by using the setup menu shown on the TV screen. (See page 32.)

•The adjustments take effect for all sources.

Adjusting the sound

1 Press BASS/TREBLE to show “BASS” or “TREBLE” on the display window.

Each time you press the button, the indication alternates between “BASS” and “TREBLE”.

2 Press LEVEL +/– to adjust the level from -8 to 8.

NOTE

• The adjustments take effect for all sources.

Changing the video signal

The system can be accommodated to your TV’s video signal.

7While DVD is selected as the source and before playback

1 Press and hold SCAN MODE for

2 seconds.

The current setting appears on the display window.

2 Press Cursor 3/2 to select the desired mode.

•	RGB:	Select when your TV accommodates the
		interlaced RGB/composite video signal.
•	Y/C:	Select when your TV accommodates the
		interlaced S-video signal.

You can get better picture quality in the order — “RGB” > “Y/C”.

3 Press ENTER while the selected mode is shown on the display window.

NOTE

•Although the picture may be distorted when you press ENTER, this is not a malfunction of the system.

•“RGB” is selected at your purchase.

15