JVC GVT0155-001A manual Tray lock, On Screen twice, SETTING, with Shift pressed

When￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿using the on-screen bar:

1 ON SCREEN twice.

2 Press Cursor ￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿/2 to highlight .

Press ENTER.

￿6 Press ENTER at the end of the part you want to repeat (point B).

Dolby D 2/0 . 0ch

4 Press Cursor Y/5 repeatedly to select

“A-B”.

5 Press ENTER at the beginning of the

part you want to repeat (point A).

Dolby D 2/0 . 0ch

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿Press ON￿￿￿￿￿￿￿SCREEN￿￿￿￿￿￿.

To cancel
Select “OFF” in step 4, then press	.

NOTE

When playing back a DVD VIDEO, A-B Repeat Playback is possible only within the same title.

• “A-B” cannot be selected during Program and Random Playback.
• “A-B” cannot be selected during playback with PBC function.
	￿￿￿￿￿
Tray lock
You can lock the tray and prohibit the unwanted disc ejection.
On the center unit ONLY:
￿		7 pressed and
While the system is on standby mode, press 0
held.		￿￿!￿￿￿on the display
• The system turns on and “LOCKED” appears
window.

• If you try to eject￿￿￿￿￿￿￿￿￿￿￿￿￿￿the disc, “LOCKED” appears to indicate that the tray is locked.

Carry￿￿￿￿￿￿￿￿￿out the same operation again.

• The system turns on and “UNLOCKED” appears on the display window.

You can adjust the balance between the front left and front right speakers.

Balance Setting￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

•￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿Before you start operation;

There is a time limit when doing the following steps. If the setting is cancelled before you finish, start from step 1 again.

1 SETTING, with SHIFT pressed.

￿￿￿￿￿￿	B A L		R	-- 5
Example:
	B A L		C T R
Press Cursor			/ to make an
adjustment or selection.
The￿"￿#￿￿￿adjustment$		display automatically disappears a few
￿seconds later with the￿￿current setting.