JVC TH-V70R manual Connecting the FM and AM MW antennas, AM MW loop antenna, FM antenna

Getting Started

Connecting the FM and AM (MW) antennas

•Make sure the antenna conductors do not touch any other terminals, connecting cords, and power cords. This could cause poor reception.

7AM (MW) loop antenna

Setting up AM (MW) loop antenna

Attach the AM (MW) loop to its base by snapping the tabs on the loop into the slot in the base.

If the antenna cord is covered with vinyl, remove the vinyl by twisting it as shown.

Outdoor single vinyl-covered wire (not supplied)

If reception is poor:	AM (MW) loop
Connect an outdoor single vinyl-
	antenna
covered wire to the AM EXT
terminal with keeping the AM
(MW) loop antenna connected.	Wire

Connecting AM (MW) loop antenna

1

Press and hold the terminal clamp.

2

Insert the antenna cord.

3	Release the finger from
	the clamp.

•Turn the loop until you have the best reception.

Center unit

7FM antenna

TO SP-PWV70	AUX IN			DIGITAL IN
					AV
					COMPU
	R	L		OPTICAL	LINK
FM 75	AM LOOP
			ANTENNA		AV
COAXIAL	AM EXT
H	V		RGB	Y / C
DISP.SET

VIDEO OUT

AV OUT	VIDEO
	S-VIDEO

AC IN

Connecting the supplied FM antenna

Extend the supplied FM antenna horizontally.

Outdoor FM antenna (not supplied)

If reception is poor:

Connect an outdoor FM antenna with the standard type (coaxial) connecter.

Outdoor FM antenna cord (not supplied)

NOTES:

•Disconnect the supplied FM Antenna before attaching a 75 Ω coaxial connector (the kind with a round wire going to an outdoor antenna).

•We recommend that you use a coaxial cable to the FM antenna, since it is well-shielded against interference.

11