Russell Hobbs RH1261TW instruction manual Tap may be off

Warning symbols

TROUBLE CODE	POSSIBLE	WHAT TO DO
	FAULT

	- Tap may be off.
	- Mains water may be cut-off.
	- If so, switch the programme knob
	to position 0. You can select a
	programme and run your machine
	after the mains water is supplied.
Water cut-off or	- Mains water pressure may be low.
	- Water inlet hose may be twisted.
low mains water
	- Water inlet hose may be clogged.
pressure.
	- Clean water inlet hose filters.
	- Valve inlet filter may be clogged.
	- Clean the valve inlet filters.
	If the problem persists, unplug your
	machine, turn off your faucet and
	contact the nearest authorised
	service.
Pump is faulty	- Pump filter may be clogged. Clean
or pump filter is	the pump filter.
clogged or	- Discharging hose may be clogged
electrical	or twisted. Check the discharging
connection of	hose.
the pump is	If the problem persists, contact the
faulty.	nearest authorised service.

For Customer Services, Spare Parts & Manufacturer's Warranty Information please call 01204 664 084 -31-