Before First Use
•Steam vents should be cleaned before first use. Prepare iron for steam ironing, then iron over an old cloth for a few minutes while letting the iron steam.
•Many irons spit or sputter during the first few uses with tap water. This happens as the steam chamber becomes conditioned. This will stop after a few uses.
•During first use of the iron, it may appear to smoke. This will stop and does not indicate a defect or hazard.
Features (not all features on all models)
Adjustable Steam Switch
This switch provides continuous steam in the STEAM 
position. Push the switch to 0 to change to dry iron.
To Dry Iron
1.Set Adjustable Steam Switch to 0 or empty water tank.
2.Turn Temperature Control Dial to desired temperature. Allow two minutes for iron to reach desired temperature.
To Steam Iron
Auto Shutoff Reset Button/Light
The light comes on when the iron is first plugged in even if Temperature Control Dial is set at Off. The light indicates that the iron is plugged in. After one hour, the iron will shut off and the light will blink. Push the Reset Button to turn the iron back on.
Reset
Button
Light 
1.Unplug iron. Using a cup, slowly pour 4 ounces (1⁄2 cup) of tap water into water tank opening. Plug iron into outlet.
2.Set Adjustable Steam Switch to STEAM.
3.Turn Temperature Control Dial to desired fabric setting in steam range. Allow two minutes for the iron to reach desired temperature.
Water: Please use ordinary tap water. If you have extremely hard water, alternate between tap water and distilled water for use in the iron.
Power On Light
This light comes on when the iron is plugged in and remains on until the iron is unplugged. The light stays on even if Temperature Control Dial is turned to Off.
Power
Light
4 | 5 |