Features (not all features on all models)
Spray and Blast of Steam Buttons
Push spray button to release a fine spray of water for difficult wrinkles in cotton or linen. Push blast button for an extra blast of steam.
|
|
|
|
|
|
|
|
|
|
| Blast of |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Steam |
| Spray |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fabric/Setting Chart | |||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Setting |
| To Iron |
| Ironing Instructions | |||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 0 |
|
| Off |
|
|
|
|
|
|
|
|
|
| ||
Iron |
| 1 |
|
| Acetate, Silk |
|
| Dry iron on the wrong side of |
|
|
| ||||||
|
|
|
|
|
| the fabric. |
|
|
| ||||||||
Dry |
|
|
|
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
| |||||||||
2 |
|
| Acrylic, Nylon |
|
|
|
|
|
|
|
|
|
| ||||
|
|
| Dry iron using spray if necessary. | ||||||||||||||
|
| 3 |
|
| Polyester, Rayon |
| For polyester, dry iron while the | ||||||||||
|
|
|
|
|
|
|
|
| fabric is still damp. | ||||||||
Range | 4 |
|
| Cotton Blends |
| Iron using steam or spray for | |||||||||||
|
|
|
| Wool |
| For wool, use a press cloth and | |||||||||||
|
|
|
|
|
|
|
|
| difficult wrinkles. | ||||||||
|
| 5 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Steam |
|
|
|
|
|
| steam iron on the wrong side. |
|
| ||||||||
|
|
|
|
|
|
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
| |||||||||
| 6 |
|
| Cotton |
|
|
| ||||||||||
|
|
|
| Iron cottons while still damp, | |||||||||||||
|
|
|
|
|
|
|
|
| using steam and/or spray. |
| |||||||
|
|
|
|
|
|
|
|
| |||||||||
|
|
|
|
|
|
|
| ||||||||||
|
| 7 |
|
| Linen |
| Iron on wrong side of fabric | ||||||||||
|
|
|
|
|
|
|
|
| while still damp. | ||||||||
Caring for Your Iron
Iron
1.Turn temperature control dial to Off. Unplug and let cool. The iron takes longer to cool down than it does to heat up.
2.To empty water from iron, slowly tilt pointed end of iron down over a sink. Water will run out of water tank opening.
3.Wrap cord loosely around iron and store iron in an upright position. Do not store iron laying flat on soleplate.
Soleplate
1.Never iron over zippers, pins, metal rivets, or snaps, as these may scratch the soleplate.
2.To clean occasional
3.Always store iron upright in the heel rest position.
Troubleshooting
Won’t heat.
•Is the iron plugged in and the outlet working? Check the outlet by plugging in a lamp.
•Is the Temperature Control Dial turned to a fabric setting?
•If auto shutoff model, is the Automatic Shutoff Light blink- ing? If so, push Reset Button to reset.
Water is leaking.
•Do not overfill the water tank.
•If steam ironing, is the Temperature Control Dial in the steam range and did the iron have enough time to preheat?
•If dry ironing, make sure the Adjustable Steam Switch is in the 0, dry iron position.
6 | 7 |