There are further ports at the rear right, see figure
Connecting the server to the mains
Connecting the server to the mains
Securing the power cord in the cable clamp
Connecting the monitor
Disconnecting cables
Connecting cables
Controls and indicators
Starting up and operation
Front of server
Front overall view
Controls
Starting up and operation
Indicators on the control panel
CSS
Controls and indicators
ServerView Local Service Display
Indicators on an HDD module
Indicators on the HDD modules
Fan indicator Meaning
Indicator on the fan modules
Rear of server
LAN indicators
CSS indicator rear right
CSS indicator
Global Error indicator rear right
Global Error indicator
ID indicator and ID button rear right
ID indicator and ID button
Indicators on the power supply units right power supply unit
Indicators on the hot-plug power supply units
Switching the server on
Switching the server on and off
System already installed
Starting up for the first time
Switching the server off
Switching the server on and off
Specified switch-on time/switch-off time
Ring Indicator
Configuring onboard SAS RAID controller
Configuring the server
Configuration with ServerStart
Configuring the server
ServerStart advantages
Configuration without ServerStart
Cleaning the server
Configuring onboard SAS RAID controller
Installing the operating system
Page
Mechanical access protection
Bios Setup security functions
Property and data protection
Page
Power-on indicator remains unlit
Troubleshooting and tips
Power cable incorrectly connected
Power supply overloaded
Screen remains blank
Server switches itself off
Flickering stripes on monitor screen
Troubleshooting and tips
No screen display or display drifts
Monitor does not support the set horizontal frequency
RAID controller configuration incorrect
Drives reported as dead when starting system
Incorrect date and time
Incorrect date and time
Error message on screen
RAID controller is not configured for this drive
Added drive reported as defective
Page
CSS components
Replacing the hot-plug power supply unit
Hot-plug components
Hot-plug components
CSS components
Unlocking and removing the power supply unit
Replacing hot-plug CPU fans
Unlocking fan module left and removing it
Replacing hot-plug main memory fans
Open the housing cover see Opening/closing the housing on
Close the housing cover see Opening/closing the housing on
Hot-plug hard disk drives
Handling hard disk drives and HDD modules
Removing the dummy module
Removing/installing the dummy module
Unlocking the HDD module
Installing/removing the HDD module Unlocking the HDD module
Pushing the HDD module into the slot
Installing the HDD module
Lock the HDD module
Removing the HDD module
Vcaution
Hot-plug expansion cards
Slots with and without hot-plug functionality
Removing a hot-plug expansion card
Deactivating, unlocking and removing the board
Removing the expansion card from the removal tool
Removing expansion card from the removal tool